Question 2: How to insert DD picture DD into the word block diagram to draw a new figure (the drawing toolbar appears at this moment) DD Click the rectangular button DD in the drawing toolbar, and hold down the left mouse button to move the mouse.
It is not easy to answer questions and understand each other. Your adoption is my motivation.
If my answer doesn't help you, please keep asking questions. You can also send a request to our team, and there will be more professional people to answer your questions!
Question 3: How to make a block diagram in word? At 80 o'clock, 1 multiple figures can be combined. Right-click to cancel the combination. In two words, the software that can draw pictures is much simpler.
Question 4: How to make an excel block diagram How to make an Excel organization chart _ Baidu Experience
Question 5: How to make program block diagram in ppt 1.
Click the AutoShape button on the Drawing toolbar, select a flowchart item, and then choose the End button. At this time, the mouse will turn into a cross, press the left mouse button in the editing area, and then drag, and the box will be drawn. In the same way, other block diagrams can be drawn.
2) The size and distribution of the block diagram
Hold down the Select Object button, and then drag a box in the workspace to frame all the drawn block diagrams. When all the block diagrams are selected, right-click the diagram and choose AutoShape Format. Select the size tab, set the height and width of the block diagram to 0.6, 1.4 cm respectively, and click OK. So all the graphics are the same size. Keep all the block diagrams selected, click the Draw button, select the Align or Distribute item, and then select Align Left. Now all drawings are aligned to the left. Click the "Drawing" button again, select the "Alignment or Faceting" item, and select the "Vertical Distribution" command, so that all the block diagrams are not only aligned to the left, but also evenly spaced vertically.
3) Draw connectors
After drawing a series of flowcharts and aligning them, select the AutoShape button in the Drawing toolbar, and then select the straight arrow connector in the connector. Drag the connector from the lower border position of the first block diagram to the upper border position of the second block diagram with the mouse. Release the mouse and the connector will automatically connect to the midpoint of the drawing. After drawing the straight arrow connector, select "Elbow Arrow Connector". Connect block diagrams 3 and 6 with elbow arrow connectors, so that all the block diagrams are connected.
4) Enter the text
Select the first block diagram, press F2 to enter the text editing state, and enter "Start". In the same way, enter the text in other block diagrams one by one, hold down the SHIFT key, click all the block diagrams in turn, select them, and then click Font on the Format menu. In the pop-up dialog box, set the font size to 18, set the character color to yellow, and then click OK. This is the effect after setting.
5) Filling effect
Keep all the block diagrams selected, click the Fill Effect button in the drop-down menu, click the transition tab, select the two-color check box in the color, black in the color 1, blue in the color 2, and portrait in the shading pattern, and select the third deformation method. Press the "OK" button, please click the blank slide with the mouse to fill in the effect of all the block diagrams.
6) Object combination
Press CTRL+A to select all the graphic objects, then right-click the graphic and select the Merge command in the Merge item, so that all the graphics are merged into one graphic object, as shown in the following figure. We can easily zoom and move it. The virtual frame part is the scene of dragging the whole graph with the left mouse button. If you press F5, you can browse the whole flowchart in full screen.
In this section, we draw a flow chart together. I believe you have learned! The method of drawing flowchart in other OFFICE components is basically the same, except that there is no connector for custom graphics in WORD, and arrows can only be used instead. One advantage of drawing a flowchart with connectors is that if one of the graphs with connectors is dragged, the connectors will automatically change accordingly, so that we can make and edit the flowchart quickly and conveniently.
How can the block diagram of problem CAD be made like this? Please give the reference steps. Thank you for drawing it yourself. Draw a standard box, such as A3 or A4, then offset or copy the lines before writing.
Question 7: How to make a block diagram of a chart? The block diagram of MicrosoftOfficeVisio uses all kinds of ordinary blocks and blocks with convex effect for collective discussion, planning and communication. Use tree shapes to represent hierarchies, such as genealogy or event planning. You can also use concentric circles and fan rings to create onion-shaped charts. Create a block diagram: On the File menu, point to New, point to Block Diagram, and then click Block Diagram. Drag shapes from the Block and Block stencil with raised effect onto the drawing page. To add text to a shape, first select the shape, and then type the text. You can open the ends of some shapes to make one shape flow into another. Tip Place an open shape and hide the lines. You can put the open shape in front. To change the order of the selected shapes, on the Shape menu, point to Order, and then click Move Up One Layer or Move Down One Layer.
Question 8: How to make a block diagram with PS? First, open the picture to be made by PS, create a new layer, then select Image → Canvas Size, change the unit of width and height to pixels, and then increase the values of width and height by the same amount (for example, by 20 pixels), and press OK. Draw a circle on the drawing board with the selection tool, then select Edit → Fill, set the color to white and confirm. At this time, you find that the picture is covered with white. Double-click the mouse on the bottom layer, remove the small lock sign on the right, and drag the layer just filled with white to the bottom of the bottom layer. Did you find the white edge? Then create a new layer according to the previous steps, increase the width and height of the canvas a little (such as 4 pixels), fill it with other colors, and then drag the layer to the bottom. Is there a boundary? The specific value can be changed by yourself. Change the purpose of the box under the canvas size panel, and you can find it yourself. I hope it helps you.
Question 9: How to make the following flowchart in word20 10? The more detailed, the better. Insert the same block diagram-shape-flowchart (second)
Drag on the document, resize, and double-click the shape-set the shape fill and shape outline color in the drawing toolbar (here set to 204, 232, 207).
Insert shape line (first line)
Right-click the line and choose Set Shape and Format-Width (here set to 1.5 points).
Just connect straight lines and rectangles.
How to make a block diagram in word Steps 1: Create a "new drawing canvas" in word.
1
Open the word document, place the cursor where you want to insert the flowchart, click Insert in the toolbar above, and a line of insertion tools will appear below, where you can find and click Shape, and finally select a new drawing canvas at the bottom of the drop-down box.
2
A double-line canvas box will appear where the cursor is in the document. This is a drawing canvas. Only flowcharts created in the drawing canvas can use the connectors of flowcharts.
end
Step 2: Select and insert a flowchart.
1
Select the drawing canvas, click "Shape" in the toolbar above, and select the appropriate flowchart in the flowchart column of the drop-down box.
2
When a flowchart is selected, the cursor will turn into a cross, and then press and hold the left mouse button to draw a figure on the canvas.
end
Step 3: Add the connector of the flowchart.
First, select the connector of the flowchart. Select the canvas, and the commonly used connectors will appear in the upper left corner of word. If you can't find the connector, you can click Insert-Shape and select the appropriate connector on the line.
Click the selected connector, and the mouse will turn into a cross. Move to the flowchart, and four black connection points will appear at the midpoint of the four sides of the flowchart. Place the mouse on one of the connection points and press the left mouse button. Remember, don't release it right away.
Place the mouse on one of the connection points and press the left mouse button. Remember, don't release it right away. Drag the mouse to the flowchart to be connected, and four connection points will immediately appear in the flowchart. Let's drag the mouse to one of the connection points and release the mouse to complete the connection of the two flowcharts.
four
Select a connector, and you can design the thickness, color and shape of the connector in the toolbar above.
How to make a technical roadmap with many boxes and lines in WORD? The specific steps of making a technical roadmap with many boxes and lines in WORD are as follows;
1, turn on the computer and find the WORD software to open.
2. Click File to create a new blank WORD document.
3. If you need to make a drawing frame, find an optional drawing, click "Optional Drawing" and "Flowchart" in turn, and various drawing frame styles selected in the Flowchart will appear on the right. Just choose what you need.
4. For example, if you select the most common rectangular box, the software will automatically open a canvas to make a picture box.
5. In the new canvas, hold down the mouse to draw a rectangular box, then right-click and select Add Text to add text to it.
6. Other parts of the required block diagram can be completed according to step 5.
7. Come down and start the connection. Click "AutoShape" and "Connection" in turn, and select the required connection line from the various styles that appear on the right.
8. For example, if you choose the second connecting line, when you put the mouse near the rectangular frame, a small blue dot will appear around it to connect, which marks the middle position of the edge of the rectangular frame.
9. Follow the instructions of the small blue dot to continue the connection.
10, as shown in the figure after all connections are completed. At this point, the connecting line is aligned with the middle of the rectangular frame, and this is completed.