resume for free download
link:
extraction code: 862b
template refers to a fixed format for drawing or designing plans, and sometimes refers to the nucleotide sequence used to generate complementary strands when DNA is copied or transcribed. Template is the result of fixing and standardizing the structural law of a thing, which embodies the standardization of structural form. Personal resume handwritten template
The personal resume template is as follows:
1. Find a clean A4 paper, if not, ordinary manuscript paper will do.
2. Write with your neatest handwriting.
3. Look up "Resume"
4. Write your name, gender, age, place of origin, date of birth, education, major, height and other basic information in the front.
5. Write your work experience or work experience.
6. Write down your job skills, and you can also write down your strengths here.
7. Write down your study experience (what you studied from what year to what year, such as junior high school, high school and university)
8. Write down your contact information and apply for the position.
Your resume should be as simple and clear as possible, highlighting your experience and skills. A piece of paper is enough.
Extended information
A resume is a brief introduction sent by a job seeker to the employer. Include your own basic information: name, gender, age, nationality, native place, political outlook, education, contact information, as well as self-evaluation, work experience, study experience, honor and achievement, job search desire, brief understanding of this job, etc. Take simplicity and focus as the best standard.
the first principle is to be focused. A recruiter wants to see you take a serious and responsible attitude towards your career. Don't forget that employers are looking for the right person for a specific position, and this person will be the most suitable person among hundreds of applicants.
the second principle: treat your resume as an advertisement to promote yourself. The most successful advertisements should be short and appealing, and can repeat important information many times.
Your resume should be limited to one page, and your personal introduction should not be in the form of paragraphs. Write a concluding paragraph at the top of your resume page, stating your greatest advantages in job hunting, and then describe these advantages in the form of experience and achievements in your personal introduction.
Third, we should present favorable information and strive for the chance of success, that is to say, we should try our best to avoid being rejected at the resume stage.
when writing your resume, you should emphasize the work objectives and key points, keep the language short, use more verbs, and avoid irrelevant information that may make you obsolete. You know, when you are allowed to participate in the interview, the resume has fulfilled its mission.
Reference:
Resume _ How to make an excellent template of resume with ps
Resume is a brick to attract personal job seekers, and we can make resumes with ps, which can reflect the ability of individual job seekers. The following is the tutorial of ps resume making that I brought to you, which I believe will be helpful to you.
Steps to make a resume with photoshop
Material preparation:
1. A personal photo (of course it looks better! )
2. Material pictures of bamboo leaves. I'm going to make a cover with a green theme, and I believe the cool tone will make the boss
like it better. The quality of the pictures should be as high as possible. The following two pictures were taken by the author with a digital camera.
Creation tool: PS7./CS
1. Open PS, create a new blank document, and name it "Cover. psd". The width and height are 42 cm and 29.7 cm respectively, and the resolution is 3 pixels/inch. The mode is CMYK mode. Click the menu "View → Ruler" to bring up the scale.
Click View → New Reference Line to open the Reference Line dialog box. Select Vertical for Orientation and enter 21 after Position.
After confirmation, a vertical blue reference line will appear in the center of the picture, so that we can distinguish the front cover from the back cover.
PS to create a resume-set rectangle properties
2. Select the Rectangle Tool to draw a rectangle with a width of 1cm on the right side of the reference line, the color is grayish green (RGB:194,22,193), the mode is "darkened" (as shown in Figure 1), and the transparency is "9". Select "Brush Tool", select "Rectangle" with 18-pixel strokes with a spacing of 24%, and draw a dotted line on the right side of the rectangle just drawn to set the color deeper. The color matching of this work,
mainly uses similar colors, so that the overall sense is more harmonious.
3. open the bamboo leaf material, drag it into the "cover. psd", and click the menu "Edit → Free Transform" to change the size and position of the bamboo leaf picture. "Free Transform" is a common tool in PS, and it is more convenient to use the shortcut key "CtrlT". Set the
picture level above "Bamboo Leaves". Use the "Text Tool" to type the title and some text information. Let
draw a rectangular substrate with the "rectangle tool" under the text "self-introduction". Finally, create a new layer, use the Elliptic Marquee Tool to delimit a circular selection, click the menu Edit → Stroke, set the width to 2 pixels and the color to light green, as shown in Figure 2 after the cover is completed.
PS making a resume-cover renderings
4. Create a new file with a width of 1 pixel and a height of 1 pixel, and 5 "content" is transparent and "ok". Press Ctr to enlarge the picture view and draw a white rectangle at one third (as shown in Figure 3).
select all the pictures ("CtrlA") and click the menu "edit → define patterns", and PS will save the pictures as filling samples
. Close the diagram without saving.
go back to "cover. psd" and create a new layer named "white stripe". On the left side of the reference line, use the Rectangular Box Selection Tool
to delimit the rectangular selection area, click the menu Edit → Fill, select the picture just defined as the fill sample, and press OK. The effect is shown in Figure 3. Changing the color of the lower layer can change the effect of stripe display, because stripe species are transparent except white.
PS to make a resume-a rectangle at 1/3
5. Click the magic wand tool on the "Bamboo Leaves" layer to get a blank space, and then click "Select → Reverse Selection" to get a bamboo leaf-shaped
selection area. Go back to the "white stripes" layer, click the menu "Select → Transform Selection", adjust the position and size of the selection, and press the
Delete key, and the rectangle with white stripes will become a bamboo leaf hollow. Finally, execute the menu Edit → Transform → Flip Water
and turn it over. Add a gradient background from green to white under this layer, or add some geometric patterns. The pen
writer put a small maze to add some interest. We can also do a better job of hollowing out bamboo leaves: add a vector map
layer mask to this layer (menu "Layer → Add layer mask → Show All"), and then fill the mask with a gradient color, so that the hollowing out bamboo leaves looks more layered, and the back cover effect is shown in Figure 4.
PS makes a resume-the effect of the front cover and back cover
PS makes a resume-the canvas expands downwards
6. Click the menu "Image → Canvas Size" to increase the height to 39.7 cm, and the positioning mode is shown in Figure 5.
I won't go into details about the specific design, and the final product is shown in Figure 6. After printing, cut it along the red line with a utility knife (don't add the red line when making
), then fold it and stick it with double-sided tape, and the cover of a personal profile will be completed. After opening it, my photos and brief introduction are presented on the left, and 16 copies of various certificates are displayed in the right pouch.
Method of designing resume cover with Photoshop
1: Open Photoshop, click "File-New", and set the height to be 213mm, the width to be 3mm (both dimensions are 3mm larger than A4 paper, which is called "bleeding" to ensure that there is no blank margin when printing), the resolution to be 15 pixels/inch, the color mode to be CMYK and 8 digits, and the background content to be white.
2: download a background picture related to your major, with a resolution of 4×6 or above, to ensure clarity. Open the picture, press Ctrl+A to select all, select the "Move Tool" on the right side of the first line in the toolbox and drag it into the "Resume Cover", then press Ctrl+T to adjust the background to a suitable size; Drag the background to the bottom layer in the Layers panel and set the opacity to 2%. (If you can't move the background picture, you can double-click this layer in the Layers panel, pop up the New Layer window and click OK to unlock it. )
3: Select the T-shaped text tool in the toolbox, click the canvas, and the cursor and text layer will appear; Select the appropriate font and font size in the font selection box under the toolbar, and then enter information such as Resume, Name, Graduate School, Major and Phone.
four: if you come from a famous family, you should highlight your status as a famous school. Download and open the school Logo; Use the magic wand tool on the right side of the second line in the toolbox, click on the blank space of the Logo, and then click Select-Reverse Selection in the toolbar to select the school Logo and the text part. Use the mobile tool to drag the selected part to "Graduation School" in the canvas of Resume Cover, and then press Ctrl+T to freely transform the Logo to a suitable size.
five: it is a good way to write a "sales pitch" that reflects your own quality on the cover of your resume. The text input method is the same as just now, but a substrate should be added to achieve beautification effect. Select "Layer-New-Layer" to create a new layer, and use the "Rectangular Checkbox" on the left side of the first line of the toolbox to draw a rectangular box with an appropriate size; Then use the "paint bucket" tool to fill the selection box in red; Drag the layer under the "sales pitch" layer and set the opacity to 3%. You can also add a substrate to the information bar in the same way. If you can't draw a substrate with a suitable size at one time by using "rectangular marquee", you can freely transform it to a suitable size by using Ctrl+T after filling the color.
six: "file-save as" is saved in JPG format. Print the cover with coated paper, bind it together with the resume text, hand-write the personal information part, and make a personalized resume! Hurry up and act!