Detailed explanation of installation steps of suit door
The door is what defines home and outdoor, and it is also a sharp weapon for us to prevent thieves. It can be said that doors and people have gone through too much history, but many people still know very little about the installation of doors, so today I will show you the installation steps of suit doors.
The first step of door installation: proofread the hole.
I wonder if you neglected this step when you installed the door. Everything else is more important. Does the hole size meet the installation requirements? Do not meet the requirements should be necessary to deal with.
Install the door set Step 2: Unpack the box.
Before installing the suit, unpack and check whether the door frame, door cover line, door retaining strip, sealing strip and parts are in good condition, and make preparations before installation.
Install the door set Step 3: Assemble the door frame.
Generally, the door we get first will be simply disassembled for the convenience of transportation, so the door frame should be assembled when we get it. When assembling door frames, the overlapping parts of vertical frames and horizontal frames must be glued and then fixed by self-tapping.
Step 4: Position the door frame.
This step is very important for the installation of the suit door. Door frames shall be positioned according to indoor elevation lines. First, use a wooden wedge to clamp the door frame from the periphery, and then use tooling and a wooden wedge to hold the door frame firmly from the inner opening of the door frame. By clamping the wooden wedges inside and outside the door frame, the verticality and levelness of the door frame and the inner diameter of the door frame are adjusted to meet the design requirements.
Step 5 of door installation: glue the door frame.
Remember to clean the wall first when doing this operation. After wetting the wall with a watering can, when filling styrofoam, pay attention to the proper amount of styrofoam and cut the excess styrofoam flat with a blade.
Step 6: Install the door cover wire.
4-6 hours after glue injection, after the foaming glue is cured, the tooling and wooden wedge can be removed, and then glue is applied in the groove of the door frame, and then the door cover line is embedded in the door frame, and the door cover line is tightly pressed to make it fit the wall surface to avoid excessive cracks. If this happens, all the above work is required to be reworked.
Install the suite door Step 7: Install the door leaf.
This is the last process of installing the door. In this process, we should pay attention to the opening direction of the door and install hardware to ensure that the gap between the door leaf and the door frame meets the design requirements, so as to ensure that the door leaf switch is flexible, but there can be no too big gap.
Matters needing attention in installation of suit door
Just now, I briefly showed you the installation steps of the suit door. Next, I will tell you what details you need to pay attention to during the installation process.
The first point: when installing the door, remember that the door cover should be fixed on the wall with a walking head, and wooden bricks or nails should be nailed on the outside of the vertical edge of the cover. Wooden bricks should be trapezoidal, and when bricklaying, they should be embedded in the wall and fixed, so that the cover will be more stable and firm, and the door and window cover will not shake because the door and window sash are opened.
The second point: When installing the suit door, remember that the window cover must be treated with anti-corrosion, coated with anti-corrosion oil, and nailed with cold-proof felt on the outer wall door and window cover. Anti-corrosion oil is applied to prevent the side of the door and window cover in contact with the brick wall from being damp and rotting.
The third point: try to choose the finished door for home installation, because the finished door is processed by the factory, so there are many shapes, while the shape made on site is relatively simple.
The above is the installation of the suite door arranged by Bian Xiao for everyone. I hope I can provide some help when you install the suite door. In fact, when we buy a suit door during decoration, we usually have a professional master to help us install it. We usually just watch it. But we should also understand the installation of the door, so that we can not only supervise the installation workers, but also modify them if there are minor defects.