Introduction of design specifications and key points of exhibition hall

With the improvement of people's quality of life, people pay more attention to the improvement of spiritual life. People usually choose to attend concerts, read and exchange meetings to improve themselves, and visit museums and museums. Compared with museums and exhibition halls, it is more public and open. Did you pay attention to the design style of the exhibition hall when you visited it? This open design must be rigorous. You can learn about the elements and specifications of the exhibition hall design together.

What are the elements of exhibition hall design?

1. The basic exhibition hall should be arranged in the most eye-catching and convenient position in the exhibition area. What is the spatial organization between exhibition halls? The systematic, sequential and selective display and visit should be guaranteed.

2. The exhibition content of the temporary exhibition room needs to be changed frequently, and it should be set separately in the design and designed as large as possible.

3. According to the nature and scale of the exhibition content, determine the layout of the showroom. When the whole exhibition content is a complete system, it is required that the exhibits between each part and within each part are connected in turn and displayed continuously, generally in a single-line display mode; When the whole exhibition consists of independent parts, and the exhibits of each part do not require a clear order, they can be displayed in parallel, generally using multi-line display.

4. Large and medium-sized exhibition halls should have lecture halls, which are close to the showroom and relatively independent.

5. The exhibition hall should be simple and unpretentious, and don't pretend to be the owner, so as not to affect the display effect.

Code for design of exhibition hall

1, it is forbidden to set up booths at the entrances and exits of the exhibition hall, fire alarm, fire control facilities, power distribution facilities, safety evacuation doors, etc. Exhibits and equipment participating in the exhibition shall not block, block or interfere with the entrances and exits of the exhibition hall.

2. Welding, chainsaw, planer and other processing tools are not allowed in the exhibition hall, heavy hammer operation is not allowed, and foundation laying is not allowed in the exhibition hall.

3,? It is not allowed to use and store pressurized containers (such as air compressors and gas cylinders). ) in the exhibition hall without permission. If it is really necessary to use and store it, you must contact the security section of the exhibition service center of the agricultural exhibition hall in advance and get permission before using it.

4,? The packaging materials, wastes and inflammable and explosive materials of the exhibits must be cleared out of the museum in time, and shall not be piled up in the passage or at the entrance of the exhibition hall.

5,? The special equipment management department of the convention and exhibition service center is responsible for the on-site management of the construction unit. For the booth that is not constructed according to the regulations, it has the right to order it to rectify or stop construction, and give a warning to the construction personnel who are not wearing the construction * * according to the regulations, and stop power supply if the circumstances are serious.

6 in violation of the provisions of the exhibition hall construction, the construction unit is responsible for compensation, heavy casualties or fire accidents, handed over to the judicial department.

Key points of exhibition hall design:

1, site selection and general layout

There are a large number of exhibition halls, and the requirements for site selection and general layout are: the exhibition hall should be located in the urban area or the suburbs with convenient transportation. Large exhibition halls should have enough mass activity squares and parking areas, as well as outdoor exhibition venues. Outdoor venues should consider the greening and beautification of the environment. Functional partitions are easy to connect and do not interfere with each other. Generally speaking, the number of buildings should not be too high. Pay attention to the relationship between exhibition halls, and form an organic building group according to different nature and specific conditions.

2. Exhibition Hall Design

The showroom of the exhibition hall is the central link of architectural design. The key point of the design is that the layout of the showroom can be determined according to the display content, which can be whole continuous, parallel multi-line or piecewise continuous, but it must be systematic. The tour route should be clear and avoid detours. The tour route should not be too long, and the rest place should be arranged appropriately. The connection between exhibition hall and transportation hub (hall, lobby, lounge, stairs, elevator, etc.). ) it should be convenient. The entrance and exit should be obvious, the outdoor traffic road should be smooth, and the traffic route should not interfere with the visit route. If the showroom is located upstairs, there should be elevators for the elderly, children, pregnant women and disabled people and special elevators for transporting exhibits. The showroom should have a good direction, but avoid direct sunlight on the exhibits. Try to avoid noise interference inside and outside the library. Create good ventilation conditions and arrange ventilation equipment. Make full use of the display wall, so that the lighting port does not occupy or occupy less of the display wall, so as to increase the effective display area.

3, lighting and lighting

The importance of lighting for exhibition hall buildings, in addition to the mission of collecting and preserving exhibits, the most important task is to provide visitors with visits and research. Therefore, how to make the audience see the exhibits correctly and clearly is an important theme. The key to solve this simple problem is its lighting.

The above is the introduction of the exhibition hall design. We can see that there are some elements to be observed in the design of the exhibition hall. All the exhibits are connected in turn, and the city is very simple. After all, we are concerned about the exhibits, and then the specification of the exhibition hall design. In this open occasion, people's safety must be the main consideration, so the entrance and exit passages of the exhibition hall have safety facilities, so there are some precautions, and finally the design points of the exhibition hall are strict. I hope the above introduction will help you.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~