Plug the dongle into the printer socket on the host when it is not turned on, that is, the parallel port (if there is a parallel port scanner, please connect the dongle to the back of the scanner). The order is: scanner-dongle-printer or parallel engraving machine), and then put the eternal CD into the CD-ROM drive, and an installation interface will appear at the back. Click "Next" according to the system prompt on the screen until "Finish" appears, and the installation is successful. (If the installation interface does not appear automatically, please open my computer, double-click the CD icon, find the SETUPEXE file in the directory, and double-click to enter the installation interface. )
Second, how to enter the eternal edition of the sculptor?
1. Click the "Start" button, and then click "Engraving Master Eternal Edition", or double-click the "Engraving Master Eternal Edition" icon on the desktop to enter the operation interface of Engraving Master.
2. Click Graphics Library on the File menu. At this time, the word "Figure" appears under the cursor. Click the left key anywhere in the layout, and the graphic library information dialog box will appear. Click the "album name" drop-down button to select "eternal album", click the "album category" drop-down button to select the required graphic category, pull the slider to select the required graphic, and then click "eternal album".
(You can also click the shortcut icon on the left when you enter the Graphic Library.)
Third, how to set the layout
Select the layout from the system setup menu or press F 10 on the keyboard to open the layout dialog box, enter the actual height and width of the glass (unit: mm), and click OK. The rectangular box on the layout is the actual size of the glass.
Four, how to zoom graphics
Select a graphic, drag eight small black dots to zoom at will, or press the keyboard shortcut F8, and the Zoom dialog box will appear. Enter the required number (unit: mm) to define the size of the graph, and scale it arbitrarily with equal ratio and unequal ratio. When scaling, please tick first, and then enter the required number.
Shortcut keys: F2 is twice as large as the cursor, F3 is twice as large as the cursor, and F4 is full-page observation.
Five, how to decompose and mosaic graphics
Select a graphic, click "Turn into Curve" or "Merge into Curve" in the Deformation menu, click "Contour Separation" in the left toolbar, and then move the mouse to the non-graphic position of the layout. After clicking, the graph will be completely decomposed. Hold down the left button to draw a rectangular box, and all the framed parts are selected. Click "Profile Combination" in the left toolbar to merge the selected parts into a whole. (Please refer to page 36 of the instruction manual for the operation method. )
According to the above method, multiple graphs can be opened at the same time, and any part of each graph can be selected for splicing until a satisfactory new graph is obtained.
Six, how to increase the thickness of graphics
Click "Increase Thickness" in "Deformation" and the "Increase Thickness" dialog box will appear. Remove the "V" before the "horizontal edge", enter the required information, and click Enter.
Special note: the software only supports two-line graphics thickening; For flowers, figures and other complex graphics, it is suggested to increase the thickness by 0. 1mm at a time to avoid long waiting time.
Tip: When increasing the thickness of mosaic door graphics, please scale the graphics to the required size before continuing; Try not to scale the graphics in unequal proportions after thickening, so as to avoid uneven line thickness. Please remove the original image after adding thickness, and then carve and output.
Seven, how to print the output graphics.
Click "Engraving Output" in the left toolbar, and six toolbars will appear. Click "Output" at the bottom to open the "Engraving Output" dialog box. Select the same or similar brand and model as your engraving machine in "Equipment", and select the port where your engraving machine is connected to the computer in "Port". In general operation, it is suggested that "saving paper output", "automatic paper feeding" and "off-line cutting" be included in the hook. The column "Material width" defines the width of the protective film used. Remember not to exceed the width of the protective film, preferably 20mm smaller.
Tip: In order to ensure the output quality, don't set the data in "Material Height" too large, because the long distance of the paper cutter will affect the engraving accuracy. It is suggested that the width of protective film is not enough for too large graphics, so it can be output in pages.
Example description: A customer ordered a piece of glass with a width of 2000mm and a height of 1500mm, but your engraving machine actually carved a width of 600 mm.. What should I do? Don't worry, this software will automatically output by page. You only need to set the layout according to the actual size of the glass, then click "Engraving Output", set the "Material Width" in "Engraving Output" within 600mm, and click the four arrow keys in "Engraving Independent Variable" to output in pages. (Turn the page once, click Output once, until all graphics are output)
How does the sculptor use it? Well, yes, to be more specific, Baidu also has a tutorial.
How to use the master engraving gallery how to use the master engraving gallery
1. First press the icon of the album.
2. Press the left mouse button at the desired position on the screen.
3. Select a graph, and then press the Enter button.
After installing the engraving machine and the engraving master, enter the engraving master interface, and the engraving output is gray and cannot be used. What should I do? The sculptor needs encryption dog decoding to use it, otherwise it is gray. Or look for a cracked version on the internet.
Master engraving 8.20. 1 How to use 1 and how to engrave through master engraving?
Enter the word first, then click "Enlarge", and then select the unit of CM and MM-the width of the word edge.
2. How did the master carve the words into arcs?
Input Text-Typesetting-Arch Arrangement-Attribute-Placement
3. How does the seal cutting master compose words?
In the variant, there is a curve, and then the scattered groups are clicked in the typesetting.
4. How does the sculptor import bmp?
File-Image-Read Image, Import bmp
5. How does the sculptor output to the engraving machine?
Just find the corresponding model in the sculptor.
6. How did the sculptor add color?
There are many colors on the right. Click on the desired color to change your graphic line.
7. How does Master carve a five-pointed star?
In the master's photo album.
8. How to add an engraving master font file?
Method 1: copy the font file under \windws\fonts.
Method 2: Open the control page, find the font and open it; Then copy the font file into it.
9. How does the master carve an arrow?
There are many in the photo album.
10. What key does the sculptor press to copy?
ctrl+C
Master of cracked sculpture:: 3322. /soft/ 10775。
How to increase the thickness of the sculptor? Open the software. After selecting the finished drawing or setting, select the deformation item on the menu bar. Look carefully at the thickness added above, or press ctrl+e.
What if the engraver can't engrave the printout? Of course not. Don't use pictures Not at all. The photo album brought by the engraver can do it, but the picture you converted can't. Why? I don't know. Anyway, the map you converted can't be engraved. Of course, the tools you use are just sketching. There should be a scanned copy in the "file" of the carving master (I haven't used that for a long time, I can't remember it clearly). There is a picture stroke in it. Just draw the image and carve it.
How to use master engraving in Windows7? Let's take "opening a big enterprise" as an example:
Font size can be ignored. First set the "layout size", for example, the door glass is 300*50cm, and the layout can be set to 300*50cm (note that the unit in the main engraver is mm). Then, enter the word "business is booming" (regardless of size and font), then left-click black to select it, and right-click "t" to select the font you need. The size of the word can be stretched directly under the "selection state" (arrow). Put these four words on the page, as long as they look appropriate.
It should be noted that the actual size of words is different from the set size (smaller than the set size); Even if the same size is set, the actual sizes carved by different fonts are different (for example, the font is set to be 400 wide and 400 high, while the actual carved height is pure black 328. 1mm, the line type is 342.4mm, and only 222.9mm is official script; In practical application, you can't ask every word to be the same size, absolutely the same size. In most cases, several words seem incongruous when combined, which everyone should understand. ) So you can't just look at the data displayed in the font settings.
There are two ways to determine the actual size of the sculpture (this is very accurate, so to speak, accurate to mm): 1. Turn words into curves: Select in the selection state-> Click "Transform-Turn into Curve" (four words are a whole at this time)-> Click on the "distribution group" on the left (so the four words are independent)-> Click a word to stretch at will (the actual size will be displayed in the lower right corner); 2. Right-click to darken a word, and its actual width and height will be immediately displayed in the lower right corner of the screen; According to the difference between the data and the data of the required size, increase the value in the font setting to change the size.
After the layout is determined, it is recommended to save the file first. In order to save materials, you can first convert all the words on the page into curves and then carve them out, and then reset the width of the page according to the width of the selected post-it notes (the length doesn't matter, but it should be enough to hold all the words), and then arrange the words closely (even in a rotating staggered way, as long as the strokes between words don't overlap and stick to each other) (although individual facets below 40cm are not necessary, whether or not should be considered). ) The "40cm" here is an example of a 45cm post-it note.
Turning into a curve is an effective and convenient way to change the font size and shape, because after turning into a curve, you can not only stretch, rotate, tilt (oblique cutting), flip and map at will, but also edit nodes, change and modify the stroke shape of the font at will, and even recombine and cut with other characters ... This is also a skill that needs to be used frequently when making and modifying some simple patterns.
Some font files contain incomplete characters and cannot be input. Only one font can be changed. Both font files and windows font files are available, and you can also add the required fonts to the fonts in windows.
Signboards and banners are often made in bold (thick, flat and black), and other commonly used ones are running script, official script and Weibei. A person should decide which font to choose according to the actual application and type, and also according to the customer's requirements and preferences, and finally his own preferences.
How to adjust the layout of engraving press F 10 by engraving master? Master engraving is in millimeters. How big is your dry glue? Set it yourself. Generally, after 450 or 600 is adjusted, you should be able to type what you want to engrave. Copy, then resize, then press Engraving, and press Engraving to output. It is not difficult to adjust the engraving machine now. Aim the knife at the edge of the paper and then position it on the engraving rod to see if the knife can be pressed down.
Give it to me, brother. I'm tired of typing so much. Give me some work ~ ~!
Specifically, whether to import the master in corelcrdw or actually input the master and then output it. How accurate, of course, it is more accurate to carve directly from the sculptor.