108 What's the difference between 5cm and 6cm mahogany bracelets? Fujian Xianyou Great Wall Rosewood answers for you. Beads vary in size, but they are all suitable for ladies to wear.
What is the difference between agarwood bracelets, sandalwood bracelets and rattan bracelets? Aquilaria sinensis: It is made by knotting eight agarwood trees in the world: Indian agarwood, American agarwood, Malay agarwood, wild agarwood, crude agarwood, Malay agarwood and Aquilaria sinensis (Aquilaria sinensis). The formation of agarwood is that these trees are invaded and parasitized by fungi after their branches are broken by insects, wind, lightning and other reasons in nature. Under the action of enzymes in bacteria, starch stored in wood parenchyma cells is eroded and decayed, which produces a series of changes and forms balsam. Finally, after years or even thousands of years of deposition, solid condensate containing balsam and wood components is formed. This is recorded in ancient books; After nearly a thousand years of corrosion, the exudate produced by insect biting wood left fragrant wood segments without decay. Compendium of Materia Medica: "Old wood, rotten skin for many years, not bad heart branches, hard and dark, but also agarwood." That's what we really mean-agarwood. Therefore, it is different from Aquilaria sinensis and Daphne.
Sandalwood: It belongs to Santalaceae. Sandalwood is mainly produced in east India, Thailand, Indonesia, Malaysia, Southeast Asia, Australia, Fiji and other hot and humid areas. Among them, old sandalwood from India is the best product. Indian sandalwood is characterized by white with yellow color, high oil content and lasting fragrance. Sandalwood produced in Australia, Indonesia and other places is inferior in texture, color and fragrance, and is called "Johor-Baluchi". Most newly cut sandalwood. Recently, there is often a pungent smell and a special fishy smell, so it is often necessary to put it aside for a while when making incense, and then use it after the breath is calm and mellow. Sandalwood has been stored for decades or even hundreds of years. At this time, the fragrance of sandalwood is very moist and mellow, which is the best of sandalwood. Also known as "Laoshan Dalbergia", it was called "Johor Baluchi" immediately after logging. Sandalwood is a semi-parasitic plant, which grows very slowly and usually takes decades to become a useful plant. It is one of the slowest growing tree species, and the mature sandalwood tree can be as high as ten meters. Sandalwood is very precious, and it must be parasitic on Chinese parasol trees, red bean trees, acacia trees and other plants at seedling stage to survive. Solid sandalwood has a limited output, but people have a great demand for it, so it has always been a rare and precious wood.
Tengxiangmu: It is a kind of woody vine, distributed in Southeast Asia, with a small number. The wood grain is clear and beautiful. It has a special fragrance. Because it is a vine, its diameter is generally small, so it is only suitable for making small utensils and handicrafts, and it is rarely used.
The above are the differences and characteristics of three bracelets made of different materials.
Provided by Xing Xing.
The beads of a few mahogany bracelets are divided into 25mm(9), 20mm( 12), 18mm( 13), 15mm( 15) and12mm (/kloc). If it is hand-refined, there are 6mm and 8mm, and the serial numbers are 108 and 2 16.
Inquire about Buddha in Taobao shop.
How many particles are there in the mahogany bracelet? Generally speaking, the diameter of beads is 8, 12 and 20 mm respectively, and the corresponding number of beads for bracelets is 13, 15, 18, and the most suitable one is probably 15. thank you
What's the difference between nanmu and nanmu bracelets? From the perspective of wood science, Nanmu is the scientific name of Nanmu (the word "Nanmu" is somewhat vulgar), while Jin Sinan is not the scientific name of Nanmu (just a common name).
Jin Sinan, commonly known among the people, is probably a kind of tree called Nanmu.
So it can be roughly understood as one thing, but it is called differently.
What is the difference between "redwood" and "hardwood"? Hardwood is just the opposite of softwood produced by conifers. Hardwoods generally have higher density and hardness, but the real hardness of hardwoods and softwoods is quite different, and a large number of varieties overlap each other. Sometimes hardwoods (such as balsa) are softer than most softwoods.
Hardwood is generally used to make exposed products such as furniture, wooden floors or utensils. In areas where cork is scarce, such as Australia, hardwood is even used as a structural material for buildings.
The common hardwoods are: walnut, pineapple, camphor, beech, nanmu, manchurian ash, Schima superba, Sophora japonica, five-pointed maple, teak, rosewood, rosewood, Luan, oak, Populus americana, West African cherry, West African pear, beech and so on.
Because of the wide variety of broad leaves, they are collectively called miscellaneous trees. Among them, light and soft materials are called soft impurities, such as poplar, paulownia and balsa. Hard and heavy materials are called hard impurities, such as oak, white oak, Schima superba and Liquidambar formosana.
Black wood does not refer to all redwoods, nor is it a kind of wood, but a general term commonly known as the domestic redwood wood agreement. According to the definition of national standards, its scope is five genera and eight categories. Five genera: Pterocarya stenoptera, Dalbergia Dalbergia, Persimmon, Asparagus and Tilia amurensis. Eight categories: rosewood, rosewood, rosewood, rosewood, ebony, striped ebony and wingwood.
What's the difference between wooden bracelets and plastic handcuffs? Resin! Not plastic! Can the weight of resin compare with that of wood?
What's the difference between mahogany handle and manual refining? The machine head is a common form of literary play, which belongs to a typical plaything, machine head, meaning, and playing with the hand. Strictly speaking, mahogany hand pieces include bracelets and bracelets, because bracelets are played in hands most of the time, and there are many kinds of bracelets and bracelets, so people inadvertently classify them as a separate category, which actually belongs to a kind of hand pieces, but mahogany hand pieces are not only bracelets, but also many other products. thank you
What's the difference between pine and mahogany? Pine has the characteristics of loose fragrance, yellowish color, many scars, quick response to atmospheric temperature, easy expansion, and extremely difficult natural air drying, so it needs manual treatment, such as drying, degreasing to remove organic matter, bleaching to unify tree color, neutralizing tree properties, and making it difficult to deform. Mahogany is dark in color, reflecting antique style, and is used in traditional furniture. The heavy wood gives people a feeling of good quality. Generally, wood has its own fragrance, especially ebony. Hard material, high strength, wear resistance and good durability.
I hope the escort network's answer will not let you down.