Hope to adopt
Question 2: How to clean up the residual inkpad after using the seal? Generally, cleaning is not required. If there is too much mud in the tank, you can wash it with an old toothbrush and soap. In addition, if the seal itself is engraved well, there will be no such problem.
Question 3: How to remove the inkpad of the private seal?
I. Chemical composition of inkpad:
The main raw materials for making ink pad for painting and calligraphy come from minerals, vegetable oil, plant fiber and natural spices, which are made by hand after careful investigation and reasonable formula. Common ones are cinnabar, cinnabar and babao. Ink has its own characteristics in formula and color. It is different from the inkpad sold by general stationery stores, and its quality directly affects the effect of stamping.
Inks used by ordinary people are ordinary middle and low-grade products. Inks can't be maintained during use, which leads to easy separation of grease. Inks' fibers will rot and lose elasticity, resulting in adhesion to seals. Inks will stick to the concave surface of seals.
Second, the removal method of inkpad:
1, cleaning materials:
A, medical grade alcohol 100ml.
B, toothbrush (direct scrap)
2. Cleaning operation method:
This method can clean the male and female seals.
A, the bottom of the seal is pre-soaked with alcohol to make the alcohol fully contact with the inkpad, and then the inkpad is dissolved. The general treatment time is about 3 minutes.
B, after soaking, gently scrub the concave surface of the seal with a toothbrush dipped in alcohol, and the inkpad can easily fall off clearly.
3. Precautions:
A, don't close to the fireworks when cleaning, so as not to cause a fire.
B for seals with precious materials, it is recommended to use a softer toothbrush, and the cleaning method is lighter.
4. After cleaning, it can be dried naturally without washing.
Three. Maintenance of seals and inkpad
Good inkpad is thick, bright, delicate, bright and steady. At present, the inkpad in Zhai Lihua, Zhangzhou, Fujian is the best, and it is also called "the three major printing plants in China" together with Hangzhou Xiling inkpad and Changzhou Z Yutang Longquan inkpad. In addition, the inkpad of Suzhou Jiangsi Xutang, Weizhou Yishoutang and Beijing Rong Baozhai are also available for sale. At present, there are many kinds of inkpad sold by calligraphy and painting shops in the market, with prices ranging from 10 yuan 50g to 100 yuan 50g. However, as long as it is thin, thick, bright, bright, heavy and oil-free, it can be used.
Among people who often use seals, inkpad plays a certain maintenance role because of its frequent use. Therefore, in the frequently used inkpad box, inkpad rarely produces the phenomenon of oil separation. When the seal is not often used, the inkpad should be modulated every one or two months, and the inkpad should be rotated to make its oil fully and evenly contact with the plant fiber. In this way, the protection of inkpad is extremely important. In the later use process, it is not easy to stick to the concave surface of the seal.
In the process of long-term use, the oil will gradually decrease with the passage of time, resulting in the drying of inkpad. In this case, castor oil can be blended, not much, just a few drops. After adding castor oil, fully stir with a wooden stick or other materials to mix the oil and dry inkpad into a relatively uniform oily inkpad.
For a very common seal, you can choose a cheaper chemical inkpad, which is actually not mud, but a chemical dye. It has the advantages of convenient maintenance, non-sticking to the concave surface of the seal and clear imprint, but it is far from the traditional inkpad in terms of attributes.
Question 4: How to clean the inkpad on the seal? Use candles!
Take a piece of white paper, light a candle, stare at the wax liquid on the white paper, a little more, and then put the seal on it. When the wax liquid is dry, pick up the seal, and the inkpad on it will remain on the dried wax liquid. Larger seals can be manufactured many times.
Question 5: How to wash off the printing oil on your hands is to use detergent.
Wash it a few times.
If not, try using an organic solution, such as alcohol.
Question 6: What can be used to clean the inkpad on the seal? If chewing gum is "washed" for a long time, the sealing will be stained with oil sludge, which will affect the sealing effect. You can't wash it with water or pick it with a needle. The best way is to put the chewing gum that is fully chewed and ready to be thrown away on the stamp and hold it by hand, and use its viscosity to stick off the oil stains at the seams of the stamp, so that the stamp is as good as new. The candle "washes" the seal for a long time, and some dregs will be stained on it, which will affect the seal effect. In this regard, candles can be lit and melted wax can be dripped on the letters of the seal. After cooling and curing, the candle block can be taken out. Repeat several times to remove the inkpad residue. You can also gently brush with a brush dipped in gasoline or kerosene. Don't use needles, awls, etc. Choose at will to avoid damaging the words and borders on the seal.
Question 7: Ask a practical question: How to clean the inkpad on the seal? Hello, wet the surface, gently brush it with a brush, and then add a detergent brush. If it is not clean enough, add a washing powder brush. It is best to clean the toothbrushes that are not used at home.
Question 8: How to clean seals, red ink, dirt and oil stains on clothes;
Soak the top with a mixture of soap and gasoline (without water) or smear it on the color stain, gently rub it to dissolve and fall off, and then wash it with soap. If the oil has been removed and the color is still there, it should be faded. Use bleaching powder or insurance powder (for silk clothes) to remove color stains.
Question 9: How to print the stamp dipped in inkpad? Dip the inkpad evenly first, then put the seal on it, with the paper to be printed in the middle, and put a thicker cloth under it.