Don't put on the bracelet you just bought. It is best to use a white cotton glove tray for labor protection. After a week or so, a bracelet becomes a bracelet. Remember not to sweat on your hands, because wooden bracelets will rise when they are wet, and the wood grain will be thick or even cracked after drying. It's best to feel smooth but not astringent when playing. Once it is astringent, your hands will sweat, so you don't need to play it again. Otherwise, the more dishes there are, the less interesting they are.
If the bracelet gets wet by accident, dry it immediately, and then play it with a white cotton glove tray for a few days. Do not expose to the sun or air dry. In addition, pearl friends with sweaty hands often have dark hands but no luster, mainly because of sweating. The solution is to put the bracelet on your wrist, slide it on the other arm (when wearing short sleeves in summer), and polish it at the same time.
After a year or two, bracelets can produce relatively stable patina, especially red sandalwood and yellow gorgeous. Minnan's bracelets will have glass luster and are very beautiful.
I hope the answer can help you.
Question 2: How to play wooden bracelets? It is suggested to play with wooden bracelets with cotton gloves, let the beads glow for a few days and let them naturally oxidize, and then repeat the above process, usually about three months. At this time, the bracelet feels smooth and delicate, such as touching glass beads. You can wash your hands and play at this time. Be careful not to touch water and chemicals as a reference.
Question 3: How to roll boxwood bracelets? Wear gloves for a week first, then use them for a week, and then leave them for half a week to a week. Repeat step two or three. Don't worry, avoid soaking and exposure.
Question 4: How to dish the jujube bracelets? Wear a towel or glove tray for a week, then use it for another week, then leave it for half a week to a week, and repeat two or three steps. Don't worry, avoid soaking and exposure, and don't be contaminated with cooking oil.
Question 5: How to serve Bai Ya bracelets?
Because of the delicate wood and high oil content, the golden bell and cypress bracelet does not need any oil when it is coiled.
Step 1: put the beads in a vegetable bag and gently knead each bead. It doesn't take long to rub. You can rub it if you have time. If you have no time, you can stop. Just follow your heart and let nature take its course. Please note that the beads must be coiled around the hole. After several days of polishing, the beads are basically polished, and you can wear them at this time. Pay attention to put it in a sealed bag after each dish.
Step 2: After the patina is formed, it can be worn for a period of time to naturally oxidize it. We also call this step "waking the beads", which can make the patina on the beads harden to a certain extent, usually about a week, during which it is not necessary to re-plate.
Step 3: Repeat the above process for 5 or 6 times, that is, two or three months, and you will see that your beads are very aura. Good beads on the plate sometimes show strong reflection, while others are like glass luster.
It is important to note that the golden bell and cypress beads should not be exposed to large moisture at any time. If the beads are dirty, you can wipe them a few times with a slightly moist cotton cloth, and then leave them for a while before playing. When coiling, try to coil all areas of the beads, especially the holes.
Besides, summer is a special time to start with golden bells and pearls. Golden bell and cypress beads without thick patina are not suitable for long time wearing in summer. You can wear them for two days and then let them stand in the shade for two days.
I hope the answer can help you.
Question 6: How to maintain each kind of wooden bracelet to make it shiny? Muzhu bracelets are made of natural materials, so we should pay attention to maintenance, and even exaggerate that they are cared for like babies, so the more beautiful they are, the more spiritual they are. For ordinary people, although it is impossible, the following are the solutions to common problems in the maintenance of beads bracelets and some precautions. A beaded bracelet is dull: it is normal for the wooden beaded bracelet to be black after wearing. This is because the newly made bead bracelets are polished and polished, and the surface is bright at first, but the sweat and oil on the surface of human skin adhere to the surface of the beads and have not yet formed a stable patina. At this time, it is necessary to play with the plate and let the wooden beads form patina as soon as possible. Of course, you can always wear it on your hands. After a long time, it will naturally form patina, but the patina formed after playing is so moist. Rubbing a wooden ball can form a patina (that is, a dish in the mouth of an expert), but it does not mean that it can be formed by rubbing it once or several times, and it needs to be adhered to for a period of time. It should be noted that some novice players like to raise wooden beads with oil. This method is not suitable for all wooden beads, especially Callicarpa and Huanghuali, which are oily and do not need oiling. The correct way is to rub 1-2 weeks with a soft cloth or gloves, and then play with your hands (clean hands). After about 1-3 months, patina will form, which will wrap each wooden bead, and you will no longer be afraid of losing water and changing color. Recommended reading >>& gt How to plate two wooden beads bracelets to crack: wood will lose water when placed in the air, and it may crack when exposed to the sun. So pay attention to avoid exposure to the sun, and try to put the wooden bracelet in a sealed pocket when not in use. In addition, you can also consider applying pure olive oil to moisten the wooden beads. (Not suitable for oily wooden beads such as lobular rosewood beads and Huang Huali wooden beads) Small pits on the wooden beads: The so-called "small pits" on the wooden bead bracelets are the characteristics of the wood itself, not the "defects" during production, and its accurate name is: brown eyes. Brown eyes refer to the scars on the branches when the wood grows and forms! Or small grooves with lines on the hardwood plane. Note: 1. Don't wear other metal ornaments at the same time when wearing the bead bracelet to avoid collision and deformation. Second, avoid contact with water vapor and chemicals, and don't wear bathing suits, especially in seawater. Third, if you have enough time, clean it with cotton after wearing it every day and put it in a jewelry box for preservation. Four, beads bracelet because of wearing dust, you can use a soft brush dipped in toothpaste to scrub, after washing, you can use cotton cloth to dry. Five, the maintenance of beads bracelets should always touch the jewelry with your hands, which will enhance the luster of the bracelet. 6. You'd better take it off when washing your hands. Soap contains alkaline substances, which will damage the beads and affect the luster. 7. Be careful not to touch acidic or alkaline substances to avoid cosmetics being contaminated by beads. Eight, wear bracelets in order, first, then wear bracelets to avoid hooking clothes when wearing, causing beads to fall off. Nine, carry a small jewelry bag with you, to avoid taking off the bracelet and putting it on the sink because of washing your hands, and accidentally falling to the ground and breaking it.
hope this helps
Question 7: How to put a new bracelet with gloves on the bodhi wood bracelet and preliminarily clean the surface of the beads! It takes about a week for the beads to rest for a few days. Regular use of the scarf tray can make the beads brighter. It is recommended not to get started in summer, there is sweat and oil secretion! Affect the color of beads.
Question 8: How to dish the rosewood bracelet?
First, from the purchase point of view, the first thing to look at when buying is the quality of the material, because a string of good quality rosewood bracelets will be easier to play with and will become more beautiful. When looking at materials, we should pay attention to density and oiliness. Small brown eyes or invisible ones are high density, and the bracelets that look shiny and slippery are oily. Uniform color is enough, its color depth doesn't matter, because the beads will be oxidized, the color will gradually become darker, and finally the color will be unified.
Second, the selection of beads. In order to make the beads more beautiful, you need to play with pure cotton cloth, and you need smooth cloth without Mao Mao. In this way, the sweat will not touch the beads, and the bracelets will be more transparent when rolled out, and the surface will feel like a film.
Third, the rosewood bracelet should be played gently, not too violently, and don't let the beads make a loud crash. This way, your hands won't get tired and feel sour. You won't sweat your clothes. Stop when the cloth feels a little wet, and don't roll it again. If the cloth is soaked and the beads come into indirect contact with sweat, the beads will still feel dull and black. The beads made in this way will not look good, and you don't have to dish them for seven or eight hours a day. Give the beads some time to adjust their size.
Fourth, everyone will play in a different way and time, and the effect will be different, but the final result will be similar. Generally, the beads will not fade after playing with cloth for two to three months, and there will be some achievements in the plate, but the beads are still far from the patina, because the patina of rosewood takes a long time, not something that can be done in a few days or months. Generally, rosewood should be at least patinated.
At this time, it is almost enough to play with rosewood bracelets, because bracelets are bought as ornaments. You may find that it will still turn black, so it doesn't matter. Once or twice, the original luster will be restored. That is to say, a plate is used while wearing it, usually on your hand, and you can take it down to play when you are free. However, some friends just want to make their beads look good. If wearing or not is the second place, they can continue to play with cloth, and the more they play, the brighter they get!
5. Beads generally do not touch water. And rosewood is also wood, which will change the humidity inside the beads after soaking in water, making the beads easy to crack and turn black after soaking in water. If you accidentally get wet, just take a cloth and dry it immediately. Generally, you should pay special attention to the beads that you just started playing with. After a period of time, the beads will be much stronger, and soaking in water to dry will not have much effect.
Sixth, try to avoid beads bumping. Although the rosewood wood is hard, there will still be scratches or pits when it bumps, which will affect the appearance and your mood. If you match the beads at the back, it will be different from the original.
Question 9: How do ebony bracelets play with cotton gloves?
Question 10: What kind of wooden bracelet is better? Personally, I think sea yellow is the best, and the more Huang Yue, the better. Old lobular rosewood can also be sold, but it takes many years.
As for how to sell it, ask Baidu for more details.