1. Collection and roughing: leaves with petioles should be collected, as well as leaves with various shapes and colors. Each kind should pick more leaves, and the same kind should also pick more leaves. Don't collect big leaves (they are too rooted to be cut in time), and don't collect rotten, damaged and ovulated leaves. Some mothers only collect leaves from big trees. In fact, many blades of grass are also beautiful.
2. Finishing and pressing: put the collected leaves into a book and flatten them with a book. The purpose of pressing is to make the leaves dry and smooth, that is, to set the shape of the leaves, but one night is enough, not too dry, otherwise it is not easy to cut. In addition, put as many leaves as possible in the book for use.
3. Composition and naming: Composition is a key step in making leaf paintings. The content of leaf painting is very extensive, but we should pay attention to the rationality, ingenuity and novelty of composition. Each leaf can stand upright, upside down, tilt and hide from each other, so consider it in advance. "Cutting leaves" is not like the effect of drawing with a pen. You can't cut it at will, but you can't shape it!
4. Fixing color: Fixing color is to stick the leaves on the paper you want to draw according to a good shape, and use latex instead of glue and paste, because latex dries quickly and sticks firmly, and it can keep the leaves clean. I used double-sided tape, and the top layer was glued with scotch tape.
Attached preservation method: If you want to preserve the leaf painting for a long time, you can add a layer of cellophane on it or use a plastic film (but the transparency is not ideal). According to my method, it is fastened with scotch tape paper, and the transparency is not bad, so there is no need for molding. We can also put pictures of leaves in a picture frame and hang them on the wall. A beautiful leaf painting will be done! A satisfactory answer is expected to be adopted.
Question 2: How to make leaf stickers? What do you need? Maple leaf
Question 3: How to put pictures on the leaves? Use a pencil to type the manuscript on the paper (you don't have to do it if you are good at painting), pick up your favorite infusion, wash it, and stick it on the drawing paper with glue (inappropriate leaves can be trimmed properly), and it's done.
If the framed collection is added, remember to do color protection treatment, which is basically coated with some kind of glue (I forget what glue it is), otherwise it will wither and look bad.
Question 4: How to make leaf stickers? It is best to dry all kinds of leaves and stick them on cardboard with glue.
Question 5: How to make a beautiful picture of leaves? Find some complete and beautiful colors. Draw an outline on the paper first and paste it layer by layer.
Question 6: How to explain the method of DIY leaf collage 1? How to make a collage of leaves;
The first is the collection of leaves.
1. First of all, consider the change of leaf shape. Such as polygonal maple leaves, round birch leaves, long leaves, oval Lespedeza leaves, etc., should be collected to ensure the diversity of pattern structure.
2. The collection of leaves should also consider the diversity of colors.
3. The collection of leaves should be serialized, that is, leaves of every shape and color can form a gradual sequence from small to large. This can ensure that there are enough choices when doing it. Also collect some flowers and leaves, seeds and stems.
Fresh leaves wither easily. If you want to use them as stickers, you'd better put them in the book and wait until they are half-dry or dry. So there will be no withering phenomenon.
Therefore, when collecting leaves, you should carry a certain amount of absorbent paper or napkins, if there are old books or magazines with rough paper. When collecting, flatten the leaves and put them in absorbent paper. After you bring it back, press it with a heavy object and turn it twice a day. When the leaves dry for about a week, the finishing clip can be used.
Then design the juice screen. There are two design methods. Set the theme first, then choose the materials. For example, the giraffe in the book, when designing the first draft, we should imagine the leaf shape suitable for the giraffe's head, neck, body and other parts, and then look for the leaves with the right basic shape. Second, choose the theme according to the shape characteristics of the leaves collected by yourself. For example, ginkgo leaves feel like humps, so we can design and make camels. Another example is the creation of goldfish tail, which comes from the shape of maple leaf. It uses leaves of various colors and shapes to cut properly, so that the leaves become living animals.
Take a suitable piece of cardboard (drawing paper can also do it) and draw a sketch of the design theme with a pencil. The layout should be balanced, the size should be moderate and the picture should be reasonable.
Choose leaves corresponding to the theme, and some can also be trimmed. Make good use of leaf back and petiole according to the situation.
Put them together, stick them on cardboard with glue or double-sided tape, and flatten them. When posting, you should pay attention to the distance from the picture, first back and then front, and pay attention to the order.
Finally, smooth your finished leaves and fix them according to your idea (just use a little glue and don't move). Then die (like making an ID card). Because the cardboard is closed, the leaf products can be preserved for a long time. You can ask the copy company that makes stamp business cards for help. Generally there will be)
If you don't want to ask for help, get on the horse with our own indigenous method, put the leaf paste you made into a fresh-keeping bag with a suitable size, rinse the mouth outward to the edge of the table, press a heavy book on it to exhaust the air inside, put a small saw blade on the mouth of the bag, press the extra mouth of the bag on the saw blade, and gently walk along the edge of the saw blade with a lit cigarette butt, thus sealing the mouth of the bag.
Now, a "masterpiece" made by myself has been born. It can be given away as a "handicraft". It will not make people think that you are "stingy" if you don't spend money. It's that you show your "talent", because money can't buy it. Just have fun!
2. The method of making leaf specimens:
(1) pressing method to prepare a wooden specimen holder. When pressing, change the position of the head and tail of the specimen from time to time. In order to promote rapid drying and preserve the inherent color of specimens, hot toilet paper can be replaced once or twice a day on the second or third day after pressing. After the specimen is pressed, sew it on a tough white paper, put a label on the lower right corner, and then put it in the specimen cabinet, and put some camphor to prevent moths.
Methods of making wax leaf specimens;
Instruments and supplies: 1, tools for collecting specimens: scissors; 2, finishing, flattening, drying appliances: absorbent paper (facial tissue, towel will do), rope (binding); 3, cardboard (table paper), glue, etc.
Method for collecting and making wax leaf specimens
1, acquisition
The requirements are representative and typical, with complete leaves, no defects and no pests.
2, finishing
Put the collected leaf specimens on absorbent paper and arrange them well, so that their branches and leaves can stretch and keep their natural state.
3, flattening and drying
This is the key link. Stick several layers of absorbent paper on each specimen clip, put the specimen, then fix the specimen with the specimen clip, tie it tightly with a rope and put it in a ventilated place. In order to speed up the drying of specimens, the paper should be changed in time every day to make it completely dry.
4. Paste (paper)
Sticking refers to binding plant leaf specimens on a piece of cardboard (table paper). There are many ways to fix plant wax leaves on the table paper. You can use small paper. > & gt
Question 7: How to make a picture with leaves? Today, I left an assignment for my friends and children, that is, to make a leaf sticker ~ I believe many friends have found a method and material about making leaf stickers for the sake of difficulty ~ Hehe ~ ~ I hope it will help you ~ Make leaf stickers 1. Collection and preservation of leaves. The collection of leaves should first consider its shape change. Such as polygonal maple leaves, round birch leaves, long leaves, oval Lespedeza leaves, etc., should be collected to ensure the diversity of pattern structure. 2. The collection of leaves should also consider the diversity of colors. 3. The collection of leaves should be serialized, that is, leaves of every shape and color can form a gradual sequence from small to large. This can ensure that there are enough choices when doing it. Also collect some flowers and leaves, seeds and stems. 4. Collect leaves with a certain amount of absorbent paper or waste newspapers, if there are old books or magazines with rough paper. When collecting, flatten the leaves and put them in absorbent paper. After you bring it back, press it with a heavy object and turn it twice a day. When the leaves dry for about a week, the finishing clip can be used. Second, the selection and pasting of leaves 1. Tools. A few sheets of white paper, a pair of tweezers and a bottle of glue. 2. Before pasting, select the leaves suitable for the picture and gently put them on the drawing with tweezers. After careful design and placement, considering that the requirements of the picture can be met, glue can be coated on the back of the leaves and placed in the pre-designed positions in order. Cover with a layer of tissue paper, and then gradually press the leaves flat to one side until the glue dries, and a painting is finished. Be careful not to push too hard, or the leaves will break easily. Third, the method of image processing 1. A reuse of leaves can be used to make stickers for many landscapes, animals and utensils. The quality of a painting mainly depends on the choice and collocation of the shape and color of leaves. Leaves of the same size and different colors can show a lot of content when stuck together. At the same time, we should consider the color contrast between leaves and the chromaticity of black, white and gray. The color of the main part should not be too bright, and the color of the details can be too bright, so that the interlaced picture is more harmonious. For example, if you put up a picture of "Proud as a Peacock", you can choose to fold green willow leaves into a fan shape, put two layers of red and yellow willow leaves in the gap of the Peacock screen, put a layer of pale yellow willow leaves on the front to make the peacock's body, and use the petiole to make the peacock's legs. In this way, a green peacock that shows its charm to every visitor is completed. If you want to post a picture of grapes, you can use leaves of different sizes and colors to overlap each other to form a fruitful picture, and then two large diamond-shaped grape leaves can complete the whole picture. 2. Combination of various leaves With the different contents of the picture, some objects need leaves of different shapes to perfect. For example, put up a picture of "Goldfish Playing in the Water". The body part of the goldfish is made of light rectangular leaves, the tail is made of red and green maple leaves, the outer layer of the eyes is covered with red seeds, and the inner layer is covered with black seeds, so that the goldfish will be lifelike. The bottom of the picture is fern grass, and the top is stuck with pine needles to represent the horizontal plane. From the picture, it looks like a colorful goldfish swimming leisurely in the water. 3. Many special pictures can often be completed by using flowers and leaves, flower seeds and pedicels. For example, if you want to post a picture of "wheat", it is mainly to cross and paste grass seeds left and right, and then use willow leaves as wheat leaves and straw as wheat stalks. Give people a picture of a bumper harvest and a bumper harvest in sight. It should be noted that leaf stickers are seasonal, so it is appropriate to choose autumn season and prepare enough paste materials without losing the opportunity.
Question 8: Pictures of leaf stickers
Question 9: Let's talk about how to make beautiful pictures of leaves by hand. You can draw the outline with strokes first, and then paste different colors on different shapes of leaves.