1. Preparation of required materials: tools such as cardboard, binder, glue, scissors, ruler, pencil, etc. need to be prepared. Among them, the main materials for making butterfly dresses are cardboard and adhesive.
2. Making the cover of the inner page: First, cut the cardboard into the same size as the inner page, and then stick it together with the inner page. Doing so can increase the thickness and toughness of the inner page, at the same time, it can strengthen the stability of binding and make the inner page more stable.
3. Making Butterfly Binding: Take out a binder from your pocket, fold its center in half, and then bend the crease into a butterfly shape. Then, bend the two parts of the binder into a shape symmetrical to the butterfly wings. Glue these two parts on the inner cover, so that you can make a complete butterfly binding.
4. Making the cover: Take another piece of cardboard and cut out the corresponding size of the inner page according to the size of the inner page. Then mark the binding position of each butterfly on the cardboard with a pencil. Finally, stick the cardboard together to form a cover.
5. Assemble the inner page and the cover: put the cover of the inner page into the cover, and then apply upward pressure at the position of each butterfly binding point to make the butterfly binding unit click the upper and lower positions respectively, thus completing the whole production process.
Pay attention to the following points when making butterfly dresses:
1, material selection: the cardboard used by butterflies should be a relatively thick material, which can withstand the pressure of binding and has high strength. The materials for making the inner pages can be different according to the actual needs.
2. Accurate measurement: When making butterfly clothes, it is necessary to accurately measure the size and position of the inner page, and accurately mark the position of the butterfly-shaped binding point on the cover to ensure the accuracy and stability of binding.
3. Pay attention to the uniformity of bonding: in the process of bonding the inner page and the cover, ensure that the glue is evenly coated to avoid problems such as waves or wrinkles after bonding.
4. Pay attention to the adjustment of butterfly binding radian: the essence of butterfly dress lies in the butterfly-shaped radian at the binding place, and the radian needs to be adjusted properly to achieve the best effect.
5. Avoid binding too tightly: Because butterfly binding is achieved by pressure, it is necessary to avoid binding too tightly when making, so as not to destroy the binding point.
6. Pay attention to polishing neatly: after the production is completed, the whole binding needs to be polished neatly to avoid uneven and upturned corners.