When binding, the bottom edge and right edge of the file in the volume can be aligned, and the file larger than the standard paper type should be folded and flattened. To show the icon in the lower right corner of the pattern material, a binding line must be added. 16 mixed A4 paper can be aligned left and bottom.
Files composed of text (or table) materials are generally bound by the method of three holes and one line. The total length of hole spacing is about140-15-20mm, the length from the middle hole to the side hole is 70-80mm, and the vertical distance between the winding ridges is15-20mm. The binding is always on the left, and the knot is behind the file.
Structural form, technology, layout and other major engineering changes, drawings change area of more than 35%, should be redrawn as-built drawings. Repainting should be numbered according to the original drawing, and the word "Jun" should be added at the end, or "completion stage" should be marked in the icon of the new drawing and the completion stamp should be signed.
Extended data
The general requirements of book binding stipulated in the Measures for Compilation of Completion Data of Provincial Improvement Projects generally include: binding materials should meet the requirements of file protection and be simple and easy to operate. After binding, it is required to be firm and tidy, without losing pages, reversing pages, pressing words or damaging files, so as to prevent reading and copying. Rusty metal objects should be taken out of the coil.
Because the composition of the content of capital construction archives belongs to a relatively large concept, and the formats are various, it is necessary to distinguish different forms, types and specifications before choosing the binding method.
Compilation, collation and handover of completion data of HowNet tracking project