First, check the box.
1. After receiving the finished product mounting business, the first thing to do is to go to the local wholesale market and choose the appropriate lines, preferably the cross-stitch pattern can be fully displayed.
2. Choose cardboard, the combination of cardboard will make this painting have a lot of color decoration.
3. Cross-stitch clock face should pay attention to choose a certain gap between the glass and the bottom plate, not less than 1 cm, because the hour hand should have enough space to run normally and accurately.
Second, washing and ironing of finished products
1. According to the cleanliness of cross-stitch, pour a proper amount of detergent into water and stir it evenly. Soak the finished product in water for 5 minutes-10 minute, gently rub it, and it will be 70% dry after passing through the water. We usually use a dry towel to dry the washed finished product and dry it quickly, so that it can't be exposed to the sun and will fade. We advocate 70% dry.
2. Put the back of the dried finished product flat on the ironing board, iron it with a steam iron across the cloth, and dry the ironed finished product again for later use.
3. installation.
1. You assemble the line you bought according to the size. If you don't have professional tools, you'd better find a merchant to order.
2. Take out the bottom plate for later use.
3. The simplest and cleanest way to adjust the position of the finished product on the floor is to use double-sided tape, which saves time and effort.
4. After sticking the double-sided tape, straighten and level the bra.
5. Put the cardboard on the pasted floor to see if the position is correct. When finished, smooth the embroidery and cardboard, and clean up the exquisite articles inside.
When installing the clock cross stitch, we should pay attention to placing the matching electronic clock components in the absolute middle position. After finding the location, use a utility knife to drill holes and dig holes in the bottom plate. Cross-stitch also needs drilling, so don't cut it with scissors. It is easy to cut the embroidery, and it is not round or neat. After doing this, stick the embroidery on the bottom plate according to the above method, pay attention to the drilled hole, and wait for it to dry completely.
6. In order to make embroidery more exquisite and perfect, some gold and silver powder can be used appropriately.
7. After drying, frame it, first stick the cardboard on the bottom plate, then lean against the frame, and then nail it. Note that the nail spacing is controlled according to the canvas size.
8. It is best to stick a circle of paper tape or kraft paper on the back and install hooks.
9. A perfect work is finished!