The character Ji is a character with an upper and lower structure. The character Shi in the upper part of the character Ji should be written as the character Tu in calligraphy. The upper part consists of two horizontal and one vertical parts. The upper horizontal section, the lower horizontal length. The horizontal stroke starts and tilts upward to the right. From fine to coarse. The lower horizontal pen and the upper horizontal pen pass through the central axis. Press the pen downwards after passing the central axis. The horizontal pen should feel like it is convex upward. The two ends are thick and the middle is thin. The starting point of the vertical pen should be higher than the intersection and middle of the two horizontal pens. The vertical pen should be thick and heavy, and the top should be square.
The lower part is written vertically first. The angle is very important and must match the strokes on the right. Lu Feng is writing. Tilt to the lower right, from thick to thin. The horizontal pen is on the right side of the vertical pen and tilts upward to the right. Be short, from thin to thick. The folding pen on the right slopes downward to the left, from thick to thin. The horizontal pen below blocks the vertical pen on the right. The vertical stroke on the left is long and the vertical stroke on the right is short.