Long horizontal explanation:
1. Left low and right high, slightly inclined to the upper right.
2. Add a pen at the beginning and end of the pen (the pen is a small dot on the lower right, so it must be small).
The process of writing should be smooth, from light to heavy, and then from light to heavy.
4. The inclination angle of long horizontal lines varies from word to word. For example, the inclination angle of the long cross in the word "seven" is larger, and the inclination angle of the last word "Wang" with the long cross is smaller.
The interpretation of two words:
1. Both horizontal lines should be slightly inclined to the upper right.
2. The two transverse directions should be parallel, and the short transverse direction and the long transverse direction are opposite in the middle, maintaining symmetry.
The interpretation of three words:
1. All three horizontal lines should be slightly inclined to the upper right and parallel.
2. The short cross in the middle is the shortest, and the two short crosses above should be right in the middle of the long cross, and the spacing between the three crosses is equal.
Brief horizontal explanation:
1. Left low and right high, slightly inclined to the upper right.
2. Don't add pen at first, you can add pen when you receive it.
3. Move the pen from light to heavy and straight.
I-word explanation:
1. Both horizontal lines should be slightly inclined to the upper right, the two horizontal lines should be parallel, and the whole word should be slightly flat.
2. The short cross is right in the middle of the long cross, keeping symmetry.
3. Short and vertical lines should be straight, not too long, and written in the middle of two horizontal lines.
On the interpretation of words:
1. The long vertical should be vertical, and the short horizontal should be written in the middle of the vertical.
2. Both horizontal planes should be slightly inclined to the upper right and parallel.
3. The long cross is vertically divided into two parts with equal length.
Dew vertical interpretation:
1. Start with a little pen, write directly below, always keep a speed, and collect the pen roundly.
2. In general, the hanging vertical shaft must be vertical. When in use, the hanging vertical shaft can replace the hanging vertical shaft, which means that when we don't know whether to use the hanging vertical shaft or the hanging vertical shaft, there is nothing wrong with using the hanging vertical shaft.
Explain the following words:
1. The inclination angle of the long horizontal line should not be too large, and the vertical line should be vertical and long enough.
2. The right point is slightly longer, and the pen is slightly above the middle of the long vertical line.
Cross-interpretation:
1. The inclination angle of the long cross should not be too large, and it should be written vertically in the middle of the long cross.
2. The horizontal length is slightly shorter, and the two are equally divided.
Vertical interpretation of hanging needles:
1. Stop the pen at the starting point and write directly below. Pick up the pen slowly and then quickly, from heavy to light, and then gently accelerate the pen to the tip at two-thirds of the place.
2. The vertical needle must be vertical. When the last stroke of a word is long vertical, it is generally written as hanging needle vertical.
Chuanzi explained:
1. The pen with hanging needle is the highest, the pen with short exposure is the lowest, and the pen with short exposure is the highest.
2. The short vertical direction is slightly higher than the vertical direction, and the vertical direction is opposite to the vertical direction of the hanging needle.
3. Make sure that the spacing between the three strokes is equal.
Opening remarks:
1. The two horizontal lines are parallel and symmetrical, and the short horizontal line is right in the middle of the long horizontal line.
2. The hanging handle and the vertical handle of the hanging needle are divided into three parts. Pay attention to the starting position of the hanging handle and the vertical handle of the hanging needle.
3. The needle hanging shaft must be long enough to accommodate the lowest pen.
Explanation of key points:
1. Points are left and right, and the head is pointed and the tail is round, and the writing is from light to heavy.
2. The difference is that the angle of the left point is slightly vertical, and the right point is 45 degrees below the right.
Fine print description:
1. The length of the vertical hook should be appropriate. If it is too long, the characters are too thin; If it is too short, the words will be too flat and wide, and the hooks will be small.
2. Starting from the right point is slightly higher than starting from the left point, both points are in the middle of the vertical hook, and the distance to the vertical hook is equal.
Less explanation:
1. The hanging vertical is slightly shorter, the pen collection at the left point is equal to the pen collection at the short vertical, the right point is in the middle of the short vertical, and the distance from two points to the short vertical is equal.
2. Long curly hair should be long and slightly curved, and the pen is just in the middle of the right point, not connected with the right point.
A blunt explanation:
1. Stop writing at the beginning and write at 45 degrees on the lower left. When lifting a pen, it should be slow first and then fast, from heavy to light. When writing two thirds, gently accelerate the pen to lift the nib.
2. The whole stroke has a slight radian, and the radian of long strokes will change in different words.
Our explanation is:
1. The stroke direction is 45 degrees to the lower right, the whole stroke should be straight, and the strokes should be light to heavy. Finally, gently press the stroke, and then gently accelerate the flattening of the stroke.
2. The angle before leveling should be gentle, don't be upturned, and don't write corners.
Herringbone interpretation:
1. Pay attention to their respective skimming angles.
2. The stroke is slightly higher than the middle of the stroke, and the stroke is as high as the stroke.
Text explanation:
1. Points should be horizontally centered, horizontally separated, and the horizontal length should be appropriate.
2. The curvature of the curl is slightly larger, with the pen slightly to the right in the middle of the horizontal direction and slightly to the left in the horizontal direction.
3. Pass through the middle or slightly to the upper left, leaving a mouth on the upper left to write, with the pen slightly to the right and the pen at the same height.
Brief description:
1. Pick up the pen slightly and write quickly at the bottom left. You should be able to use a pen quickly, straight and sharp.
2. When the short head is used as the prefix and there is a cross below, such as "Qian", "Mao" and "He", the angle should be flat.
Word explanation:
1. The short skimming angle is slightly flat, and the horizontal length should be appropriate to ensure that the short skimming is right in the middle of the horizontal.
2. Right in the middle of the dash, write horizontally and vertically. Vertical strokes should be long, and the lowest pen set should be vertical.
3. Write off at the cross point, with the pen skimming slightly to the left of the cross starting point, slightly to the lower side of the cross point, slightly to the right of the cross receiving point, the same height as the pen skimming, and the pen skimming angle should be opened.
Buff explained:
1. The short stroke angle is slightly vertical, the short transverse direction is slightly longer, and the pen is right in the middle of the short stroke.
2. The long cross must be long, the pen should be short, and the pen should be slightly to the left to ensure that the two crosses are parallel and symmetrical, and the short cross is in the middle of the long cross.
3. Go through the middle of the two horizontal lines and start writing with the highest hanging needle vertical line, which should be long and vertical.
Interpretation of vertical skimming:
1. The whole stroke is vertical, half vertical and half left, and the stroke is from heavy to light, from slow to fast.
2. The pen is slightly shorter, just below the pen. When the vertical direction is long enough, the arc turns to the lower left of the pen, and finally the pen is lifted to the tip. It should be noted that the corners should not be written, and the transition should be smooth.
Fire word explanation:
1. The stroke order is to write right dots and dashes first, and then vertical strokes and si strokes.
2. The short pen is slightly higher than the right pen, and the two pens are the same height. Pay attention to the appropriate distance.
3. The vertical stroke is the highest, passing between the right point and the short stroke. The stroke is slightly to the left than the right-hand stroke, and the stroke is written in the middle of the vertical pen. The strokes are the same height, and the stroke angle should be open.
Jin's word-for-word explanation:
1. The short skimming angle is slightly flat, and the vertical skimming angle is slightly vertical, so the vertical skimming should not be too long.
2. The horizontal stroke is opposite to the upper third of the vertical stroke, and the stroke is short and slightly to the right (the horizontal stroke determines the width of the whole word).
3. The hanging needle and the pen are in the middle of the horizontal direction, long and vertical, and the pen is the lowest.
Interpretation of horizontal skimming:
1. The combination of short transverse length and left rotation requires short transverse length and left rotation with an included angle of about 45 degrees.
2. Start the pen slightly and write a short horizontal line on the upper right. When the short horizontal stroke is long enough, stop writing slightly and write a long left stroke at 45 degrees to the left. The stroke of the left stroke is slightly to the left of the horizontal stroke, and the stroke at the corner must not be large.
Another word explains:
1. When writing horizontally, be sure not to write horizontally long, which will cause the "head" of the whole word to be extremely large.
2. Pass through the middle of the pen skimming, and leave a mouth on the upper left to write Si. The pen skimming is the same height as the pen receiving, and the included angle between the pen skimming and Si should be open.
Explanation of bad words:
1. The long horizontal direction should be long, and the short pen is right in the middle of the long horizontal direction. The radian should be small, and the pen length is slightly to the right.
2. Write a horizontal stroke in the middle of the short stroke. Horizontal strokes are parallel and symmetrical with long strokes, and strokes are parallel with short strokes. The strokes are short and slightly to the right.
3. The right point is slightly on the upper side, independent and unconnected.
Heisei's explanation is:
1. The difference between a flat pen and a straight pen is that the angle becomes more gentle, and a "short cross" is added at the beginning of the stroke, which shows a tortuous state.
2. Carry the pen from light to heavy, slightly press the end of the pen, and then gently lift the pen away from the nib. The angle of the flat front must be gentle.
Word explanation:
1. The right point is in the middle of the horizontal stroke, where the horizontal stroke changes greatly and the horizontal inclination is large, and the left stroke basically has no radian. The included angle between the horizontal stroke and the left stroke must be small, and the left stroke should be aligned with the left stroke.
2. The basic shape of the flat stroke remains unchanged, and the stroke is slightly to the left than the horizontal stroke. The horizontal stroke should be long enough and pay attention to the angle.
The official WeChat account "Hard Pen Calligraphy Research Institute" is an innovative official WeChat account specializing in free hard pen calligraphy teaching.