This character is: total strokes: 5 strokes, 1.一 (horizontal), 2.丨 (vertical), 3.ノ (捺), 4.? (捺), 5.一 (horizontal) ).
Ben běn: In calligraphy, it has an upper and lower structure, with the top extending and the bottom closing.
The upper part of the "big" character is slightly shoulder-resistant and stretches. When drawing a horizontal stroke, start the pen with a sharp shoulder, leaning forward slightly, and close the brush slightly heavier. Lift the brush high, pay attention to the shape, and then stroke downward to the left, gradually becoming lighter, passing through the center of the horizontal stroke slightly to the left. Gradually become heavier, write the outline of the belly, and then turn to outline; start from the inside of the horizontal stroke, make a small bend, and draw the stroke to the lower right. Gradually become heavier. When the stroke stops, lift the stroke to the right and slowly draw out. Front, please note that the corner is slightly higher than the tip.
The lower "X" shape is long and thin, and should be slightly tilted upward. Pay attention to the position of the horizontal strokes, resist the shoulders, and not be long; when starting the vertical strokes, aim at the middle position where the upper part intersects with the horizontal strokes, be vertical and powerful, pay attention to the length, and close the strokes with a slight droop.