Peel the skin, and gently move it on the angle grinder by hand to remove the epidermis. At this time, there will be several deep marks on the surface of the original stone, but don't worry, this step is very easy to get hurt. It is recommended to bring anti-cut gloves, mother-care glasses and anti-noise earplugs.
Removing the skin shell of jadeite original stone by hanging mill; Then, the impurities in the jadeite skin are removed by a sand grinding head, and the surface of the jadeite raw stone is finely ground by replacing the sand grinding head appropriately. Use different types of grinding wheels to grind, add hoses to uneven places, use pointed wool to grind needles, and use small-grade diamond powder paste to grind.
Methods of peeling jadeite stone: peeling, digging, coarsening, fine grinding, rough throwing and fine throwing.
In polishing operation, it is necessary to grind off the skin of the original jade with an angle grinder first, and then carefully remove the skin at the gap. This method generally takes a long time, and you can also choose a cutting machine to peel, but it consumes a lot of jadeite stone.
How to remove the skin of jadeite original stone and how to grind off the skin of jadeite original stone
1. Use a hanging mill or a table mill, or use a coarse-gauge grinding head to peel the rubber hose, but it takes a lot of time; It is also possible to cut the skin directly with a gambling stone cutting machine, but it is easy to cut green.
2. Grinding and polishing operation: firstly, it is necessary to grind off the skin of the original jadeite stone with an angle grinder, and then carefully remove the skin at the gap. This method generally takes a long time, and you can also choose a cutting machine to peel, but it consumes a lot of jadeite stone.
3. The peeling method of jadeite raw stone: peeling, digging, coarsening, fine grinding, rough throwing and fine throwing.
4. It is also possible to peel the rubber hose with a hanging mill or a table mill and a rough grinding head, but it takes a lot of time; It is also possible to cut the skin directly with a gambling stone cutting machine, but it is easy to cut green. Polishing: slowly grind off the skin of jadeite original stone with an angle grinder.
5. Peel. Remove the skin of the original jadeite stone with the action of a small hand on the hanging mill. At this time, the surface of the original stone will leave several deep traces similar to gullies. Digging, rough grinding and fine grinding.
Does Thangka need to be framed?
After Thangka is finished, silk should be sewn and mounted on the four sides of the picture. This kind of sewn silk is called "Gongxia". "Gongxia" can be made of various kinds of silk, and the size ratio is relatively fixed.
Thangka can be put in glass. Notes on Thangka Mounting: Thangka Mounting can be divided into Tibetan mounting and frame mounting.
However, it should be noted that Thangka hanging at home can play a certain decorative role, but it must be noted that it cannot be exposed to the sun or smoked. It's best to put it in the living room or porch. The most important thing is to have a respectful heart, otherwise it will be counterproductive.
If this method is adopted, it is recommended not to disassemble Thangka for re-mounting in other styles. Because if it is removed, there will be pinholes around Thangka.
If you choose this method, it is recommended not to disassemble Thangka for re-mounting in other styles in the future. Because if it is removed, there will be pinholes around Thangka. Chinese mounting, like decorative painting, uses cardboard (usually more than two layers) to separate the gap between Thangka and glass and put it in a wooden frame.
The biggest problem with Thangka decoration is that it can't get wet. Because Thangka painted the iron ore powder with glue, Thangka was afraid of getting wet. In the case of cleaning Thangka, it is recommended to use a soft dry cotton towel and gently wipe Thangka. Thangka mounting can be divided into two types, one is Tibetan mounting and the other is Chinese mounting.
How to peel small jadeite?
1. Jade peeling generally has four steps: peeling, cleaning, grinding and polishing. First, prepare the tools you need. The electric tool can be a hanging mill or a dental machine, and the consumables are grinding heads, brushes, pitot tubes and diamond polishing powder.
2. Generally, peeling is to remove the shell of the original jadeite stone by the action of a small hand on an angle grinder.
3. It is also possible to peel the rubber hose with a hanging mill or a table mill and a rough grinding head, but it takes a lot of time; It is also possible to cut the skin directly with a gambling stone cutting machine, but it is easy to cut green.
4. It is also possible to peel the rubber hose with a hanging mill or a table mill and a rough grinding head, but it takes a lot of time; It is also possible to cut the skin directly with a gambling stone cutting machine, but it is easy to cut green. Polishing: slowly grind off the skin of jadeite original stone with an angle grinder.