1 Open Word- > Tools-> Options-> Save, and remove all the ticked options in the save, and you will be OK. If this problem appears after you installed Kabbah 8, the specific solution is: open Kabbah-& gt；; Settings-> Anti-malicious programs->; Files and memory->; Then click "settings" next to "enable file and memory protection"->; Select the Attach tab-> Change the Scan Mode from Express Mode to When Accessing and Modifying, and then determine the application. Try this online method. If not, just say it.
Why can't the word file be saved?
The original text is as follows
Cause and solution: There are too many files in the 1.temp folder. The default is c:\windows\temp. Please clean up. 2. Some anti-virus software will produce this kind of error, please uninstall it first. 3. Nimda virus modified the riched20.dll file in system32 and copied it from another machine or installation CD. 4. If a formula in the formula editor is broken, delete it one by one. 5.CTRL+A CTRL+C After closing the word program, these texts can still be used by other programs to reopen the Word program. Press CTRL+V when editing a file with Word, especially when inputting a formula with the formula editor. When saving, Word will pop up a dialog box saying that the disk space is full and the file cannot be saved. Actually, there is still a lot of space on the disk, which is very annoying. The following methods may be helpful to you. This method is a bit stupid, but it is absolutely useful. I often do _). Usually the reason for this problem is the input formula, especially the recently input formula. You can confirm one or more recently entered formulas: (1) First cut and copy the recently entered fragments into a new document, and then save your file. If it still cannot be saved, continue to cut the recently entered text until it can be saved; (2) Copy the text in the new document in small pieces and keep it, so that you can find out the place that caused the problem, then delete it and re-enter the problematic place, which is usually just a formula, which can save a lot of time. There is another method, which is not bad: right-click the disk with Windows installed in the Explorer, and click Properties in the shortcut menu that appears. The Properties dialog box appears. Select the disk cleaning button in the General tab to open the disk cleaning dialog box as shown in figure 1 1.2. After disk cleaning, Windows will pop up a new dialog box. Select the Temporary Files option in the Files to Exclude box, and then select OK. Windows will delete temporary files. To manually delete temporary files, please enter the temporary folder and delete all old temporary files (temporary files begin with a tilde and begin with a tilde. Tmp extension). Return to Word and try to save the file again. If you can't save the document correctly at this time, you can take the following steps: (l) Press CTRL+A to select the whole document. (2) Press CTRL+C to copy the whole document into memory. (3) Close the Word program. At this point, the system will prompt: "You put a lot of text on the clipboard. Do you want these texts to be available to other programs after quitting Word? . (4) Select the "Yes" button. (5) Reopen the Word program. (6) Press CTRL+V to paste the copied text into the new file. (7) Name and save the new file. Note: When deleting a temporary file, a dialog box may appear indicating that the file in use cannot be deleted. This is because when Windows is running, you need to use some temporary files frequently. So when deleting temporary files manually, try to delete only a few files at first, and then empty the recycle bin on the desktop. Otherwise, you may not be able to delete all the selected files.
Why can't I display text when I save a text document?
The content you copied contains other non-ANSI encoded content. These things will disappear when you save them, leaving the most basic text documents. In other words, after such preservation, the basic characters still exist.
Why can't EXCEL documents be saved?
Double-click the file tab under the status bar, activate it, and then save it. There is static electricity on me, because that's what I do, so serious that I have to double-click every time. When I call the expert, I hope he can fix it. When people come, everything will be fine without doing anything. I'll try, but as soon as I sit down, I have to double-click again. The expert said I could only double-click because he could do nothing about the static electricity on me. Before I get on the computer, I have to go to the faucet to wash my hands and drain the sewage, otherwise I will turn it off automatically, so I also thought of you.
Why can't word20 10 save 30 points?
Word20 10 after opening the file for editing, there is no response when pressing the save button, and there is no response when saving. When you close the file and select the Save button, there is still no response. I had to download WPS temporarily, but the default file format of WPS is 2003, and there are many more. " *s "file is saved after editing.
Solution: Open word, File-Options-Add-ins, Add-ins-Go, and remove the hooks in front of Microsoft of Acrobat PDFMaker Office Addin, Microsoft of Word Manuscript Wizard Add-in, and Microsoft of Word Calligraphy Add-in. Reopen the file, edit and save it.
Why can't word be saved?
There may be two reasons for this problem: 1. There are too many junk files in the system, resulting in insufficient disk space for saving. It is necessary to remove junk files: if you use system optimization software, you can delete them directly; If not, you need to go to the directory c: \ documents and settings \ administrator \ local settings \ temp to delete junk files. 2. The temp environment variable of the system has been changed and needs to be changed to the default setting to solve the problem. The specific operation in XP system is: 1) Right-click "My Computer" and select "Properties" 2) Select "Environment Variables" under the "Advanced" tab to check whether the path of TEMP under the user variable is% user profile% \ local settings \ temp (pay attention to case sensitivity) and correct it. "It may also be caused by input method or other software conflicts, because some settings are automatically modified by killing software such as 360.
Why can't word find the file after saving it?
After uninstalling, the file association is lost, so it needs to be re-established.
Open my computer-Tools-Folder Options-File Type-New-Extension *. Advanced related file type selector program.
Why can't word be saved? . .
"There are two possible reasons for this problem, as follows:
1. There are too many junk files in the system, resulting in insufficient disk space for saving. It is necessary to remove junk files: if system optimization software is used, it can be directly deleted; If not, you need to go.
C:\ Documents and Settings \ Administrator \ Local Settings \ Temporary
Junk files have been deleted from this directory.
2. The temp environment variable of the system has been changed and needs to be changed to the default setting to solve the problem. The specific operation in XP system is as follows:
1) Right-click "My Computer" and select "Attribute Compensation"
2) Select "Environment Variable" under the "Advanced" tab to check whether the TEMP path under the user variable is
% userprofile% \ local settings \ temp (pay attention to case sensitivity), just correct it. "
It may also be caused by input method or other software conflicts, because some settings are automatically modified by killing software such as 360.
Why can't word be saved after it is closed?
What version is your word? Generally speaking, even if you turn it off abnormally, it will be saved automatically. Can I save it by pressing CREL+S? Your WORD file is damaged, and things with Chinese names can't be saved. I suggest you repair or reinstall WORD.
What if the file can't be saved on the computer?
The possible reason is that automatic recovery is set.
Step 1: Click "Start" in the lower left corner of the desktop;
Step 2: Enter "msconfig.exe" in the search box and press enter;
Step 3: Select "Start" in the opened dialog box;
Step 4: Check the box in front of "Automatically started restore program", and then click "Apply".