As a standard five-seater SUV, Xiaoqi still has a lot of space, so the family of five will not feel crowded when traveling. Seen from the front, Xiaoqi is still very wide, so there is enough lateral space in the car.
The height of the whole vehicle exceeds 1.7 meters, and the lowest point of the roof is also above the wall behind 1.6 meters, so there will be more room for passengers' heads.
Independent suspension before and after, so that the ride comfort will be better and the shock absorption effect will be better.
The length of the front door and the back door is basically the same, which means that the space between the front row and the back row can be 55 minutes, which will be very convenient to get on and off the bus, especially if the elderly and children need to sit in the back row often, and the big back door will create more room for opening the door.
When the whole family travels, people must sit in the back row, and children must be watched by adults when they are young. When you open the door, you can intuitively see that there is plenty of legroom, the door opening angle is very large, and it is very convenient to get on and off.
Sitting in the back row is the most easily overlooked safety issue. Children will have safety seats, but adults often forget to wear seat belts. Xiaoqi's safety interface is cleverly designed, and it is directly connected to the groove on weekdays, so that short-distance backpackers in the city will not be stuck by the socket.
Today, let's take a look at the most critical rear middle seat belt. The picture shows the socket in the middle position. As we all know, two-point or three-point seat belts are usually used here. Just like buses, the safety of two-point seat belts is much lower, because the middle of the back row is facing the empty space in the middle of the front row, and there is no front buffer to brake suddenly.
So where is the second point fixed? As shown in the figure, there is an interface with different shapes on the side of the seat belt socket at the driver's back. The upper socket is very small, which is the second fixing point of the rear middle seat belt.
The rear middle seat belt is on the roof of the shed at the back.
Pull it down and we will find two plugs on it, one big and one small.
Ordinary seat belts are fixed directly by upper and lower fixing points. Because this position is not used for a long time, if it is fixed directly, it will greatly affect the appearance. Usually it is not needed when there are no passengers, so it is stored at the top of the shed every day. Before use, insert the small plug into the socket just mentioned.
Then you can wear your seat belt normally, and I specially invited my mother to demonstrate, haha.
Then, two actors and crocodiles are used to simulate the use of rear seat belts.
Some friends who use this rear seat belt for the first time may not know how to take it back. Look carefully at the small opening next to the socket, which is white inside.
You just need to find a key or something to insert, and you can separate the second fixed point.
There are two small "mechanisms" on both sides of the back seat. What does it do? Seeing this, many car owners should not notice it?
Yes, it's the slot where the rear seat belt is stored every day. Isn't it a thoughtful design? Give Chang 'an designers a big compliment. This design is very good, avoiding the wear and noise caused by knocking at the door when driving the rear seat belt.
In the end, we all know that Changan used the safest three-point seat belt in the middle of the back row of Xiaoqi, which effectively protected the safety of the middle passengers. Moreover, the middle of the back row is also equipped with a lifting headrest, which can also protect the passenger's cervical vertebrae. Remember to adjust the height before getting on the bus. It is very important to ride safely, and Chang 'an is very considerate!