How to do fire safety work such as electricity consumption in canteen?

The canteen mainly uses oil and gas as the cooking fire source, and there are requirements according to the area and floor of the canteen, so it is particularly important for the safety of electricity consumption. There are certain requirements for the specification and installation of lighting facilities, the arrangement and selection of cables, and the specification and installation of switches.

For example:

The dining room lighting lamps are 1, 40W/220V fluorescent lamps, which are installed along the ceiling. The height of lamps and lanterns from the ground shall not be less than 2.5 meters;

2. The control switch is a springboard switch, and the horizontal distance between the surface mounting and the door is 0.2m, and the bottom of the height switch is1.3m from the ground;

3. When the indoor socket is exposed, the installation height is1.8m;

4. PVC plastic pipes are used for line laying, BV plastic copper wires are used for wires, and lighting lines are wired according to design requirements;

5. Lamps and sockets shall be laid separately and controlled by leakage switch;

6, three-phase load, balanced wiring;

7. The protection zero line of the socket circuit adopts yellow-green double-color line and is reliably connected with the socket;

8. The socket of air conditioning loop is 3p 16A, and other sockets are 3p 10A.

In addition, the canteen should be inspected by special personnel, and the electrical equipment should be inspected, maintained and maintained regularly. If damage is found, it should be replaced in time.