building technology
Traditional and complete diatom mud is composed of three elements: raw materials, props and construction methods. Materials are carriers, props are devices, and construction methods are rules. The combination of the three, while giving vivid expression to the wall, finally reveals and expresses the life taste and value orientation of "people". As a wall technology, mud is not only a material, it is being passed down and carried forward with its "cultural" connotation, bearing unlimited personal sustenance and self-appeal.
1, stirring
Add clean water accounting for 90% of the construction water consumption into the mixing container, then pour in diatom mud dry powder to soak for a few minutes, and then stir with an electric mixer for about 10 minute. At the same time, add 10% clear water to adjust the construction viscosity and mud paint, and fully mix well before use.
Step 2: Apply
Two times: the first time in Tu Ping is about 1 mm, about 50 minutes after completion (depending on the site climate, it is advisable to keep the surface non-sticky to prevent exposure, and fill it with materials), and the second time is smoothed (the thickness is about 1.5 mm).
The total thickness is between1.5mm and 3.0mm. ..
3. Texture pattern making
After the second application is completed, grasp the drying time according to the actual environmental drying situation, and make the texture pattern according to the construction method.
Step 4: Collect light.
After finishing the texture pattern, compact it with a light trowel and collect light along the pattern grain.