Partition bookshelf
1. Prepare a board, a few battens, an electric drill, some screws, and preferably a chainsaw for cutting battens and boards. If the boards and strips have been cut to the required size and length, there is no need for a chainsaw.
2. Make a tripod with three pieces of wood. A piece of wood needs two tripods, and so on. You need to install a few pieces of wood on the wall to make a corresponding number of tripods.
3. Determine the position of the board, mark it, and fix the tripod on the wall. Note that the upper end of the tripod should be horizontal, and the tripod mainly plays a supporting role.
4. Put the board on the tripod and fix it with screws, so that a bookcase is finished.
Waste paper box bookshelf
1. First, prepare the waste paper box. In addition, there are tapes, art knives, rulers, pencils and so on. Are needed.
2. Determine the size of the bookshelf, measure the size with a ruler on the carton and mark it with a pencil.
3. Cut the carton into the required shape along the drawn marks with a utility knife.
4. Stick the edge of the cut carton with adhesive tape and fix the shape.
5. If you think the original color of the carton is not good-looking, you can wrap a layer of white paper on the surface of the finished carton with double-sided adhesive or glue, and then paint your favorite color or draw your favorite pattern on the white paper.
Bookshelf classification
Bookshelves in libraries can be divided into metal bookshelves and wooden bookshelves according to materials, and metal bookshelves can be subdivided into single-column bookshelves, multi-column bookshelves, stacked bookshelves, dense shelves and sliding bookshelves.
Wooden bookshelf
The materials of wooden bookshelves are solid wood, plywood, wood core board, particleboard and so on. , after processing and combination, coated with paint or affixed with surface decoration materials, rich in soft texture. The common form of library is vertical inclined L-shaped bookshelf, which is convenient for readers to consult books and has different specifications.
Single row type
The so-called single-column bookcase means that both sides bear the weight of books on each partition horizontally with single-column metal plates. Each bookshelf is 90cm long and can be used alone or placed continuously. Generally speaking, the height of the bookshelf is more than 200cm, and the top will be connected with tie rods to ensure safety.
Composite column type
Refers to the two sides of the bookshelf, each with more than two columns, which bear the load of books transferred by horizontal partitions. However, in order to enhance the appearance, the sides and top of the metal multi-column bookshelf are pasted with wooden boards.