Fixing method of plasterboard directly sticking on wall surface

For interior decoration, many people stick plasterboard on the wall, and they can hang some decorative elements or calligraphy to decorate the space and provide an elegant environment. So what is the fixing method of plasterboard directly sticking to the wall? The following is Bian Xiao's introduction.

Brush oil fixation

Brush the back of gypsum board with oil or tung oil and dry it. Then nail the long 10 cm wooden board hole wall floor to the wall, nail it, adjust the flatness of the long strip, and use it as transparent oil or tung oil for gypsum board. Fixed on slats to adjust flatness.

Tripod fixing

In this way, everyone can fix the gypsum board with nails and fix it on the wall. It is similar to a tripod. As can be seen from the appearance, it is different from the previous method and is integrated with the wall. In addition, the really beautiful ones are all made of fresh Chinese fir, which contains Chinese fir materials and feels refreshing and unique.

Three in one connector fixing

If the wall is plasterboard, you can use a three-in-one connector. If there is a concrete wall, first remove the cover, lock it on the small surface of the gypsum board, face outwards, then put it on the wall, open the wall with an electric hammer, and finally fix the cork. The plate is attached to the wall.

Cutting machine fixing

First, open the wall of the cutting machine to a depth of about 5 cm, insert the surface wood into the groove and cut it directly with white latex and gypsum, which is safe to fill, but please note that this method can only be used for decoration, not for bearing.