Methods/Steps Step by Step Reading
1
/ 10
Only the right and bottom lines are reserved, and diagonal lines are treated as appropriate.
2
/ 10
Write strokes as hollow closed shapes, and cross strokes as closed shapes, but lines cannot cross.
three
/ 10
Imagine the light coming from the upper left corner, and remove all the lines that the light can shine on. The upper horizontal line and the left vertical line must be deleted.
four
/ 10
Angle less than 90 and diagonal less than 180 degrees as the case may be.
five
/ 10
Finally, the horizontal line below, the vertical line on the right, the diagonal lines greater than 0 degrees and less than 90 degrees, and some diagonal lines less than 90 degrees and less than 180 degrees are left.
six
/ 10
The intersection of strokes is the key, so we must first imagine the hollow intersection of three-dimensional, and break the line into segments as soon as it meets the intersection.
seven
/ 10
The formation process of cubical characters is from "lines" to "strokes with closed shapes" to "lighting" and then to "cubical characters".
eight
/ 10
If the strokes are not inclined and literacy is not affected, try to write horizontally and vertically, so that the three-dimensional effect is good.
nine
/ 10
When the dip angle is greater than 90 degrees and less than 180 degrees, diagonal lines should be drawn first, and short broken lines can only be in the lower right corner, but in the opposite direction.
10
/ 10
The writing method of arc oblique stroke, arc stroke only keeps the radian line where light is projected, only the radian line in the upper left corner of the inner side, the radian line in the lower right corner of the outer side and some radian lines that cannot be illuminated in the upper right corner.
The content is for reference only and is protected by copyright.