The structure of seal script is different from official script and regular script, and it has the following characteristics: first, it is rectangular, with half-character script as the measure, straight character as the body, and half-character as the vertical foot, with a ratio of roughly three to two. Second, tighten up and loosen up. Most of the characters in Biography are dominated by the upper part and the lower part is telescopic foot. Of course, there are also characters with no feet below. The main strokes are in the lower part and the upper part can be raised. Third, the strokes are horizontal and vertical, the thickness is even, all horizontal and vertical paintings are equidistant and parallel, and all strokes in the garden are round and square, making the circle lively and interesting. Fourth, balance and symmetry, balanced spatial division and left-right symmetry are important features that distinguish seal script from other characters. There are individual symmetry, local symmetry of characters, and oblique symmetry of round strokes. The "characteristics" of Xiao Zhuan's stroke order is one of the keys to writing a good seal script. Reasonable stroke order is helpful to the structural arrangement of words and the improvement of writing speed. Therefore, mastering the stroke order of seal script is also a key for beginners to get started. The stroke order of seal script is basically similar to that of Chinese characters, such as horizontal first and vertical later, from top to bottom, from left to right and so on. This is not a problem for beginners. What is important is that it is different from the stroke order of Chinese characters, and these differences are the characteristics of the stroke order of seal script. Mastering these characteristics, we can grasp the structure of seal script and achieve symmetrical balance. Symmetrical balance between the middle and the left and right is the characteristic of seal script. For seal script with middle vertical line, you should write middle vertical line or middle stroke first, and then write other symmetrical strokes after the middle positioning. For seal characters with a long arc in the middle (usually left and right strokes), you should start with the long arc in the middle and then write symmetrical strokes. Secondly, for strokes with boxes, generally, the strokes in the outer frame are written first, and then the parts in the box are written. This can control the size of seal characters and avoid overall inconsistency.
Third, write the main pen first, and then write the auxiliary pen. There are main strokes and musical characters in seal script, so it is advisable to write the main strokes first and then the auxiliary strokes. Among the four kinds of seal script, one should write the auxiliary pen first, and then the main pen, so as to better grasp the center of gravity. 5. Flexible use of seal scripts with complex strokes, the requirements for strokes should not be too harsh, and the requirements should be consistent, as long as they are convenient, flexible and evenly distributed.
The stroke order is one of the keys to writing a good seal script, and a reasonable stroke order is helpful to the structural arrangement of characters and the improvement of writing speed. Therefore, mastering the stroke order of seal script is also a key for beginners to get started. The stroke order of seal script is basically similar to that of Chinese characters, such as horizontal first and vertical later, top-down, left-right and so on. This is not a problem for beginners. What is important is that it is different from the stroke order of Chinese characters, and these differences are the characteristics of the stroke order of seal script. Mastering these characteristics, we can grasp the structure of seal script and achieve symmetrical balance. Symmetrical balance between the middle and the left and right is the characteristic of seal script. For seal script with middle vertical line, you should write middle vertical line or middle stroke first, and then write other symmetrical strokes after the middle positioning.
1) Swing left at the front 2) Swing right 3) Swing down along the front 4) Swing slowly and pick up 4. Bend straight 1) Swing the pen up against the front 2) Swing the pen to the right 3) Swing the pen down 4) Go to the end and pick it up 5. Arch up.
The arc brushwork of Xiao Zhuan is the same as that of the front. The key is to keep the posture, keep the depth of the pen consistent with the speed of the paper, and pay attention to symmetry. Two arcs should be written naturally at the junction of the middle section, leaving no trace. 6. Write the left half arc first, and then the right half arc. When writing, pay attention to the correspondence with the left arc The lines should be harmonious. Don't hesitate, otherwise the lines will be weak and lack of feeling. 7. Left and right outer arcs.
When writing the left and right outer arcs, it is important to take the starting point and the end point of the two arcs as the center, be impartial, symmetrical and natural, compact and not loose, so as to reflect the smooth and smooth beauty of seal script. 8. When writing a square arc, whether it is a rectangle or a square arc, you should use a pen to turn the corners into arcs, the four corners should correspond, the pen should not fall, and Fiona Fang should be harmonious. 9. Bending arc
There are many changes and difficulties in Xiao Zhuan's music and painting, so it is necessary to write according to its turning point. It's better to finish it in one stroke, not in one stroke. It should be done with two or three overlapping strokes. At the corner, pay attention to the whole nib of the jacket or gently twist the pen tube, and cooperate with the internal rotation of the hand cup to make the nib rotate conveniently. Analysis on the characteristics of stroke order of seal script Many strokes of seal script seem to be completed in one stroke, but in fact they are written by several overlapping strokes. In order to leave no trace at the joint, it is mainly because there is no need to go back to the front of the previous stroke, and the latter stroke is inserted. The overlap of the two strokes just hides the joint in the stroke. Overlapping strokes is a very important part in the brushwork of seal script. If you master this part, you can make the text comfortable, euphemistic and powerful. The stroke order is one of the keys to writing a good seal script, and a reasonable stroke order is helpful to the structural arrangement of characters and the improvement of writing speed. Therefore, mastering the stroke order of seal script is also a key for beginners to get started. The stroke order of seal script is basically similar to that of Chinese characters, such as horizontal first and vertical later, top-down, left-right and so on. This is not a problem for beginners. What is important is that it is different from the stroke order of Chinese characters, and these differences are the characteristics of the stroke order of seal script. Mastering these characteristics, we can grasp the structure of seal script and achieve symmetrical balance. 1. Symmetrical balance in the middle and left and right is the characteristic of seal script. For seal script with middle vertical line, you should write middle vertical line or middle stroke first, and then write other symmetrical strokes after the middle positioning.
For seal characters with a long arc in the middle (usually left and right strokes), you should start with the long arc in the middle and then write symmetrical strokes. 2. After outsourcing, the strokes in the box are generally written outside the box first, and then the parts in the box are written. This can control the size of seal characters and avoid overall inconsistency.