1. This is the back of the box.
2. Take out the cardboard, clean the inside and outside of the instrument glass in the box, and iron the cotton decoration after bathing.
Hand ironing, fixed on the back of the frame, everyone has different methods. The mirror frame seller uses glue to install the mirror frame and sew it on the back plate. Where the back line has been sewn, it is wrapped with adhesive tape, which is both beautiful and can protect the line from wear.
Fill the glass, cardboard, and back plate fixed with shanzhai enchantment in turn, fasten the surrounding metal and fix it, and you're done.
Cross stitch mounting II:
First of all, you need to go to the painting shop to choose your favorite frame and cardboard style, and make a reservation according to your own requirements and the boss's suggestion. It is best not to go to the cross-stitch shop for mounting, because they also ask others to process them, so it is better to go in person from the perspective of price and professionalism.
Secondly, when shooting a picture frame, compare it on the spot and go home to make it when you are satisfied.
(1) embroidery washing
A. it is best to wash your hands before each embroidery. You'd better not embroider when eating.
B. How to wash the embroidered painting: If the embroidered painting is checked with a water brush, it can be placed on a clean table and then sprinkled with pure water on the canvas, not too much, and the canvas will be wet. Then, you can use a toothpick (blunt) to cross back and forth at the place of inspection, so that the traces of the water-soluble pen can be easily eliminated. Don't pat it with your hands, then let it dry naturally. Advantages: no harm to embroidery thread and embroidery diagram; Embroidered cloth itself is sized, so it will basically keep the prototype of embroidered cloth-straight.
(2) Ironing embroidery
Steam iron (turn on steam and wool), turn the embroidery upside down, preferably cover it with a thin handkerchief (thin cotton cloth is also acceptable), then iron it and blow dry naturally.
(3) Carefully check whether there are some tiny threads, dust and dirt on the embroidery drawing. Don't forget to clean the photo frame, glass and paper jam. Then put the embroidered picture in the frame to adjust the position, and the board behind the frame will go up first to see the effect. If possible, prepare for the next step.
(4) Paste embroidery pictures
A. The fixed space of embroidered cloth in the frame can't be so tight, so after hanging, the cloth is easy to wrinkle due to gravity.
B, it can be pasted on the reverse cardboard; If the distance between the frame glass and the cardboard is large, or the frame may be changed in the future, you can choose a stiff cardboard (thin), and pay attention to the fact that there is no indentation on it.
C. Flour and water: put a proper amount of flour and water in a small milk pot at home, boil it on low heat, stir it clockwise or counterclockwise with chopsticks, and paste it into a sticky paste, which can be used for pasting.
D. Hold one side with two clothes pegs and apply evenly, not too much, or the paste will seep into the front of the embroidered painting.
When finished, it can be dried naturally, and then put into a frame to see the effect. You can seal the frame if you are satisfied.
First, measure the size of the embroidery (accurately) and leave enough white around the embroidery. Buy a piece of cardboard or a thick dark wrapping paper. Use a ruler and a meat cleaver to hollow out the cardboard according to the size you just measured. Remember that the inner frame must be carved straight, and the cardboard outer frame should be cut according to the wooden frame you set. Then, use four light-colored cardboard to embed it in the inner edge of the dark cardboard, and the dark cardboard is outside. Press the light-colored cardboard and fix it between two layers of cardboard with double-sided tape. It is also fixed on the cardboard with double-sided tape. They must be leveled, put in a wooden frame, sealed with cardboard or blow-molded paper, and nailed on the frame.
Mounting of cross-stitch Part III: Mounting method of word embroidery;
There are two kinds of embroidery mounting, one is soft and the other is hard.
1. Soft packaging: Just like the traditional mounting method of calligraphy and painting in China, it is directly mounted on special paper.
Features: easy to carry, easy to transport, suitable for collection, regardless of size can be rolled up and put in a special tube.
When embroidering, the needle angle should be short, and the workmanship needs to be particularly fine. The main disadvantage is that it is easy to shrink and deform under the influence of wet weather and dry bath. In the process of mounting, embroidery needs to be soaked in water first. The silk thread used for embroidery has a certain luster, which is easy to lose luster after soaking in water, thus affecting the color of embroidery. Mounting takes a long time, about a week.
2. Hard mounting: the mounting method commonly used in the process of embroidery mounting now. After the embroidery is finished, directly stick the embroidered work on a special thin board. After the glue is completely adhered, remove the embroidery, add decorative cardboard and frame it.