Illustration How to Make Do-It-Yourself Balloons

How to DIY balloon method diagram 1, stretch the balloon several times before inflation to reduce its elasticity.

2. Inflate the balloon quickly to the required length, which is generally 2/3 of the length of a long balloon.

3. Before knotting, release a small amount of gas in the long balloon to reduce the air pressure, so that the balloon is slightly soft and easy to shape.

Whether using one or more cylindrical colored balls to make complex or simple shapes or decorations, big or small, you need to master some basic manufacturing techniques and crafts, such as inflation, sealing, single bubble knot, double bubble knot, triple bubble knot, ear bubble knot and so on.

Production skills:

1, starting from the simplest, easy first and then difficult. Mastering the nature of balloons has not changed since our ancestors.

2. Complex types are also simple and simple combinations. Pay attention to technical points and complete the transformation from primary to advanced. Every complex shape is made up of bubbles and knots.

3. During the production process, pay attention to the gas volume of the magic balloon. If a bulge (thickness) is found, it is necessary to mix the gas back evenly (hold it with both hands and squeeze it, and the gas will automatically run back), which can reduce the chance of rupture during the production process.

Key points of production:

1. When folding balloons, try to avoid excessive friction between balloons and excessive friction sound.

Pay attention to whether the nails of your fingers are smooth and sharp. )

Don't fill the balloon too full. Before inflating, be sure to know how much air this shape needs to reserve. At the same time, when inflating the mouth, lengthen the hood slightly to avoid sun exposure and light as much as possible to improve the service life.

3. If you want to use pen-drawing eyes, you must use a marker pen, preferably black. The size of the painting should also be correct, and the position should be correct.

Illustration of how to DIY chicken 1

Dice the potatoes.

2.

Wash and chop the chicken leg meat, drain the blood with boiling water and marinate with a little soy sauce.

3.

Fans soak their hair.

4.

Slice the green pepper.

5.

Shred garlic, onion and dried red pepper.

6.

Heat the oil pan, add garlic cloves, shredded onion and dried Chili until fragrant.

7.

Add the chicken and stir-fry for one minute.

8.

Add potato pieces and stir fry together. Add some soy sauce, oyster sauce and two drops of soy sauce and stir fry.

9.

Add water until the chicken is cooked 10 minute, then add vermicelli and simmer for 5 minutes. After the soup is collected, add green pepper pieces, add appropriate amount of salt, and stir-fry the chicken essence evenly.

How to DIY small handbag illustration materials: 15 hollow acrylic thread,1/stainless steel needle knitting (accessories: 100 beads, 2 round tourist shoelaces).

1, the ordinary needle lifting method starts with 80 stitches, knitting two stitches upward, knitting two stitches downward, and knitting 3 inches (this is one piece of knitting, you have to knit two pieces);

2. Use three needles to surround the upper and lower needles of two pieces of fabric to weave patterns; A flower 10 stitch, the number of stitches in the pattern is 1 stitch, 9 stitches;

Weaving method of pattern: a, 1 bottom, 9 tops;

B, add 1, 1, add 1, 9;

C, 3 times, 9 times;

d, 1, 1, 1, 1, 1,9;

E, 5 times, 9 times;

F, 2, plus 1, 1, plus 1, 2, 9;

G, 7 times, 9 times;

H, 3, plus 1, 1, plus 1, 3, 9;

Me, 9 times, 9 times;

J, 4, plus 1, 1, plus 1, 4, 9;

K, 1 1 down, 9 up;

L, 5, plus 1, 1, plus 1, 5, 9;

m, 13,9;

N, 6, plus 1, 1, plus 1, 6, 9;

o, 15,9; (Start staggered knitting, that is, weave flowers on 9 stitches)

P, upper right 2 and 1, 13, upper left 2 and1; . . . . . . (and so on)

When the remaining 3 stitches are finished and the upper 3 and 1 are reached, the flower is finished.

Weave a total of 4 flowers, including staggered flowers, and then collect the bottom of the bag, and it is finished.

I can't explain the knitting method of the hand strap clearly here. Please JM find out the cylindrical knitting method for knitting Chinese knots. Knitting two, the hollow thread is too soft. When knitting, you can add a round long travel shoe shoelace in the middle to knit together, which is quite good.

The rope knitting method used in Chinese knots: starting with 4 stitches, always weave one thread on each side, 3 meters long, or according to your own preferences. Please JM find a knitting method of Chinese knots, thank you!

3. Fix the two ends of the woven handbag into a circular ring shape, cover the circular ring on the upper and lower knitted pieces of a single piece, and sew and fix it outward; The other piece is the same as this method. You can hook the edges after sewing, and the lace can also be crocheted according to your own hobbies. You'd better hook it bigger, so it looks better.

4. beading, one for each leaf. The position of the nail bead is nailed on the 1 needle in the middle of the last needle addition.

It is very troublesome to illustrate how to do DIY hairpins! I suggest that if you are a novice, it may be easier to buy a ready-made material package, so there is no need to go to too much trouble. However, there are good and bad packages. It is recommended to buy the material package of Yuanbao Handmade Materials Museum, which is more affordable. I bought it there. If you're not going to buy a well-matched one, you just want to go to a store like "Silent Night Glass" and "The Story of Mao Mei" and use your own materials. In addition, I would like to remind that newcomers can buy iron flower pieces if they are practicing hands, and it is best to buy copper flower pieces if they want to keep or sell them, because iron pieces are easy to oxidize and copper pieces are more expensive, but they are also worth a penny. If you can't bear to spend too much money on copper sheets, you can also apply transparent nail polish on iron sheets, but if you don't apply it well, it will be scrapped. In addition, if you match your own materials, you should also pay attention. You can't forget the single coil, chain and T-pin. Tools include copper wire, hot melt adhesive, punching pliers, scissors, etc. If you don't buy them, you may not be able to do it at all. Then you can match your own beads such as chalcedony, dyed jade beads, pearls, imitation pearls, Dongling jade, pink crystals, tea crystals and fluorite, which are also very useful. In fact, they are all a few cents, and then there is a necessity, that is, flowers, flower trays, various hairpins, hair combs, earrings and so on. The quantity depends on the situation. These are all necessities, and there are some "feed petals", "Czech petals", "big water drops", "rice beads" and "coral", etc. You can choose by yourself, but I used to play rice beads, but it was all over the floor. Finally, I would like to remind you that a novice must be a Mulan hairpin when entering the hairpin pit. It's simple. Buying magnolia flower buds is a feeder, and the petals of the feeder are made of the same material as mentioned above, also called ancient glass, which is sold in every store. Stick it directly on the hairpin and set a socket. Finally, talk about physical stores. Physical stores are those small jewelry wholesale markets, but I don't think it's necessary to run around. It's enough to buy such a set online, and it doesn't take so much effort at all. I hope it helps you! Also, making hair clips is not like selling other things, it will lose a few cents! Most of the time, I raise the price by about five to eight yuan, which is not much. In fact, it only takes about 50 yuan to sell one or two hundred yuan hairpins online. If the manual cost is reduced, you will feel sorry for yourself!

How to illustrate the practice of DIY pillow for cats

DIY materials: yellow cotton cloth, printed cloth each 1 ft, cotton, cotton cloth, two black beads with a diameter of 0.5 cm, a buckle with a diameter of 2 cm, a little brown embroidery thread and a little gravel.

DIY steps:

1) The front piece of the cat (yellow cloth+printed cloth) is stitched as shown in the figure, leaving 1 cm seam.

2) Sew the front piece with cotton, sew two black beads to make a cat's eye, sew a button to make a nose, and embroider cheeks and beard with brown embroidery thread.

3) The back piece (yellow cloth) and the bottom piece (printed cloth) are sewn with corresponding cotton cloth, and then the bottom piece, the front piece and the back piece are sewn into a whole piece, as shown in the figure.

4) Fold the whole piece up and down (face to face), sew both sides, leave the back of the mouth and cut the mouth.

5) Turn the back opening to the front, insert a little gravel (or plastic particles) from the back opening, then insert cotton, and sew it before opening.

6) Tail making. Cut two tails with yellow cloth, leave a seam and a circle behind the mouth, turn it out of the mouth, put cotton in the mouth and sew it up. Finally, the tail is fixed on the cat with hidden needle sewing to complete the manufacture of the pillow.

How to make DIY beaded illustrations: pinlue. /article/20 17/07/ 12 16/ 193370666

Hand-compiled graphic course key to heart beaded key pendant.

How to explain tools/raw materials by DIY basket method

Unused packaging tape. The quantity should be large enough.

Hemp rope, scissors, etc

Knitting course

The first step is to cross and fasten with hemp rope. Cross the fork up and down as shown.

Step 2, press the picture but be careful not to be too loose, or it will go out of shape!

The third step, after editing the bottom, you must edit the help, that is, edit the edge!

The fourth step is to edit layer by layer, which must be more important.

Step 5, close the edge and set the shape. The bottom edge is uneven, and it may take several days to press it with heavy objects.

How to illustrate the simple lantern method with DIY paper lanterns: If you can't make the "big guy" sold in the street and can't find any materials such as steel wire and steel plate, then make a simple paper lantern with bamboo strips, rice paper and pen and ink. Handmade paper lanterns are simple in materials and techniques, which can not only design their favorite patterns, but also add a lot of fun to festivals. The first step is to make the skeleton. The simple shape of a paper lantern is a cube or cylinder. It is best to make a frame with flexible bamboo branches or bamboo skins, and the joints are tied tightly with thin lines. If it is difficult to find, you can also use slender cardboard and bamboo sticks for barbecue. The firmness and elasticity will be lacking, but it is also a good decoration indoors. Step 2, make the lamp body. Buy some white and red ordinary rice paper or golden rice paper in Four Treasures of the Study, cut it into the length and width of the lantern skeleton, and you can design your own patterns. Calligraphy, painting and paper-cutting can all be displayed on small lanterns. After pasting, you can also use narrow silk-like paper to wrap the edges up and down, which looks more elegant, much like ancient palace lanterns. If you are not good at painting and calligraphy, there is a simple method for reference. Use a thin paper to trace the desired words on the copybook, then overlap this thin paper with crimson rice paper and dig out the words with a single-edged blade. Remove the paper towel, and hollow handwriting will appear on the red rice paper. White rice paper is used as the lamp body, and red rice paper is pasted inside, which reflects candlelight or light from the hollowed-out place, and the effect is quite beautiful. The third step is to be a light source. If you put it indoors, you just need to light an ordinary candle in the lantern; If you want to realize it, you'd better make a simple circuit with light bulbs and batteries. It may look a little rough, but lighting a lantern made by yourself on the Lantern Festival will definitely have a different taste.

I hope my answer is helpful to you.