On the basis of regular script stippling, running script adds two important writing methods: tick and pick, so the writing speed is fast.
If you use a pen, the stippling should be hooked up to strongly echo the next stroke. The two points are opposite, and the point on the left is picked to the right and connected with the point on the right.
If you use a horizontal pen, the horizontal painting should be hooked to the lower left, echoing the lower left. On the left is the word of vertical pen, and the end of vertical pen should be picked to the right to echo with the right.
Second, the commonly used "broken square is round"
When writing turning strokes in regular script, the pen tip is slightly pressed to form a square folding shape; The running script should be "broken", that is, the turning point should be written as an arc with a sense of flow.
For example, write the turning points of horizontal folding, vertical folding and horizontal skimming as arcs. Write the turning point of cross hook, curved hook and cross hook as an arc. However, it should be noted that if a word has two turning points, one must be "broken circle" and the other is square fold. Only in this way can we have a changing aesthetic feeling.
Third, don't forget to "save strokes"
Some strokes need to be omitted when writing running script. For example, the stippling is omitted, and the last point next to the figure, the figure in clothes, the figure in food and the figure in wood should be replaced by a folded tie.
The reduction of points, such as writing only one point for three points and writing the other two points vertically; Write one point for four points, and replace the other three points with a cross with a tick.
Omitted horizontal: the two horizontal lines beside the word "Sun" are practiced as one lift, the three horizontal lines beside the word "Mu" are written as arc vertical lifts, and the horizontal lines and vertical lifts beside the word "Wang" are written as one stroke.
Omitting hooks: Omitting hooks such as oblique hooks, vertical hooks, curved hooks, vertical curved hooks and horizontal folded hooks, and the hooks in serial numbers are often omitted.
Fourth, grasp the "pen contraction"
The "pen-holding" writing of running script is not like regular script, which has to come out and form a form of indulgence and stretching. The "strokes" of the running script should be contracted and closed, so as to enhance the overall momentum and flow rate and reflect the internal strength of the font.
Write a long point with oblique strokes. The herringbone head should be hooked for oblique strokes and recycled for horizontal strokes. In the "bottoming", leveling can't produce a front, so it should be recycled lightly.
Fifth, clearly understand the "rewriting method"
When writing in print, you should learn to use overlapping pens. Flipping the pen has a wide range, just like flipping things, which is mainly manifested in the following three forms.
Cover the left and the right first. After the pen leaves, bring back the ring with the nib, from left to right.
Second, the right cover is left, which is generally used for horizontal and vertical connection. The pen tip goes from the top right to the top, and then brings out the ring from the left to the bottom.
Third, under the cover, the pen tip turns from bottom to top in two forms: one is to the left and the other is to the right.
6. Simplify the whole or part appropriately.
Partially simplified case:
The simplification of "Ding" is completed with the symbol of flat and three folds at the bottom.
Simplification of "home", skimming the vertical combination, four horizontal connections, and finally vertical.
The right part of "energy" is simplified to "long".
Overall simplification case:
"Stop", first write vertical fold, and then write two horizontal points in the way of stacking, and change both vertical and horizontal points into two points.
Brother Feng practices calligraphy, focuses on students' exam fonts, and constantly updates them. Be sure to pay attention!