What are the 30 words that beginners must practice in calligraphy?

First, "Feng"

This word is difficult to write well. First of all, the quality of strokes is very high. Pay special attention to the first two horizontal lines. Don't write too short, which will cause a serious imbalance between the upper and lower proportions. Moreover, the three horizontal lines should be equidistant, the bottom horizontal line should be slightly flat, and the vertical line in the middle is easily disturbed by the three horizontal lines and inclined to the right. When you write, you don't have to worry about horizontal lines, just straight down and center. The hanging needle is vertically centered.

Second, "string"

The writing difficulty of string characters is not less than that of abundant characters. In addition to the four horizontal spacing, we should also pay attention to the quality of strokes. Pay attention to the width of two characters when writing, and ensure that the final vertical pen runs through the middle of two characters, which requires high stroke control and structure grasp.

Third, "pro"

The key point of this word is to deal with the left and right height, and the top should be flush. I suggest taking the short vertical on the left as a reference, the middle of the short vertical on the left and right parts should be on a horizontal line, and the top and bottom of the right part should also be on a vertical line, so that the word can look straight. Keep the center of gravity stable!

Fourth, "card"

This word is a combination of upper and lower structures. It won't be difficult if you write these two words well by yourself. Write vertically up and down correctly. Pay attention to the proportion of the upper and lower parts. The vertical picture below is slightly longer.

Verb (abbreviation of verb) "Nai"

This word is very common. You can also practice more. You should carefully observe the angle relationship between the left and horizontal folds and the last hook. The inclination angle of the "horizontal" part can be larger, and the final hook direction tends to be flat.