Question 2: How to carve hollow characters? Wen Tai sculpture tutorial to see where hollow characters are used
9 126 Forum
Question 3: How to carve hollow characters with Wen Tai? Carve a wooden board under the iron sheet with a engraving machine, stick the iron sheet with double-sided tape, divide each landing point vertically with a rectangle directly, and then select the inner contour and draw it directly on the wall.
Question 4: How to carve hollow characters with a carving machine? Click on the text for 5 minutes in Wen Tai, and a menu will pop up. Some words in the menu will become hollow words.
Question 5: How does the engraving machine engrave hollow characters? If there is an option from p to empty in the Wen Tai text options,
Question 6: Can Wen Tai engraving software make hollow characters into solid characters? Of course.
Question 7: How to carve the hollow character of 9 with any color (except white), and then change the foreground color of the character to white on the paper? This effect is not really hollow words, but looks like hollow words on white paper. The method taught by the teacher "Nuotai Wolf" is the correct way to make "true hollow characters".
Question 8: How to carve Chinese characters with Wen Tai? This has something to do with the self-adhesive of your engraving machine. If the adhesive is not big enough, you can consider imposition.
For example, some time ago I carved a golden double happiness of 120CMX 120CM. I first added a 3MM border to the whole word, and then divided it from the place with the least connection. When I divide it, the square is 40X55CM (the size of glue is usually 45 or 60CM, so that the size can be used to the maximum extent). Following this idea, I cut it into three parts: upper, middle and lower.
Usually, not all graphics will have such good luck. Remember to minimize the division of graphics. Really not good. Where you need to divide, it is not too important to overlap three or two millimeters when pasting. Even if there are deviations, you can practice your swordsmanship. It's not good to do this job without practicing knife skills.
It suddenly occurred to me that there is also a kind of carved hollow characters and KT board characters. You have to learn this slowly from the old master, understand a truth, and then practice your knife skills.
When carving hollow characters, try to follow the writing order of Chinese characters and give consideration to the shape and spirit of Chinese characters. Usually, horizontal strokes are cut more, because the horizontal strokes are longer, and the whole looks connected together, while the vertical strokes are generally shorter, and they are often connected together. If you cut it in stroke order, you may not see that it is vertical. For another example, if the word "city" is square and bold, the points on it must be cut out in order, but if it is block letters, it can't be like this anymore, because from the physical and mental point of view, this point is connected with the lower vertical, and it is very awkward to cut it out.
KT lettering must be cut with a new blade and succeed as soon as possible. The more you fix it, the uglier it gets. Pay attention to infinite approach when repairing, just like the principle of Bezier curve.
Question 9: How to transfer the pictures in PS to Wen Tai engraving machine for engraving? Specifically, I'm a rookie! ! Adjust the picture mode to gray, black and white, and save it as BMP. In Wen Tai, select file-image conversion, select the BMP image that has just been converted, and click Next until the conversion is completed. When finished, select and delete the above picture, and the following picture shows the tripod picture.
Excerpt from -9 126 forum
Question 10: How to carve this painting with Wen Tai carving software and a carving machine? It's best to convert to BMP format, and then convert the pictures clearly in Wen Tai.