Why did the micro-single photo burn out?

Because you can't use it.

Not everyone who buys a good brush is Wang Xizhi.

There are three kinds of fuzziness:

1, dynamic blur;

2. Inaccurate focus;

3. Exposure is not allowed.

Compared with the automatic exposure mode, there is no possibility of inaccurate exposure, because this mode will automatically balance the exposure brightness until a few phases, and there will be no big exposure problem;

Then there are two possibilities left, the focus is not accurate, and the correct way is to automatically focus by half pressing the shutter. After the focus success signal appears, press the shutter to the bottom to shoot. Don't underestimate this normal shooting method. Many people don't know about digital cameras that have been used for many years, thinking that suddenly pressing the shutter is enough. Not only that, it doesn't work yet, and it will shake when pressed suddenly, which will make the image more blurred.

Another possibility is also relatively large, that is, dynamic blur. When the light is bad, if the camera wants to ensure the normal exposure brightness, it is necessary to extend the exposure time, that is, the shutter speed is slow. In this case, if the camera is unstable and the shutter speed is slow, it will take a dynamic blurred picture;

The solutions are: speed up the shutter speed, or choose the scene mode in the camera, such as motion mode, so that the camera will speed up the shutter speed by default, reduce the exposure time, and freeze the dynamic objects or people in the photo; Or turn on the flash, so that the light is sufficient, and the shutter speed of the camera will be increased, so as to achieve the purpose of taking pictures with a freeze-frame effect.