The pair on the left is narrow and short, with width 1/3 and height of 2/3. The two strokes have different dip angles, the first one is gentle and the second one is inclined. If the two strokes are parallel, it will be more rigid.
The right part takes up a lot of space. The dots should be thick and the long cross should be the main pen. When you start writing at half height, you need to stretch lightly, bend slightly like a pole and stir up the whole word. Write from the vertical hook in the middle of the long cross. The vertical hook is slightly to the left, straight and pointed. Make a hook with a curved top and a straight bottom.
There is little difference in the stroke thickness of the whole word, which is basically square, with dense left and sparse right.
This, independent structure.
The two vertical lines are basically parallel, and the long horizontal line is the main pen. The pen from the back to the front is inclined to the upper right, with a slightly larger arc, occupying the full width. When you press the lifting point, you can lift it, which leads to the vertical hook on the right. The vertical hook bends downward and rightward against the front, but the round pen does not return to the hook, and the bottom is flush with the left end of the long horizontal line, supporting the right half of the long horizontal line and making the whole character station stable.
The whole word is a little flat, and the spacing between the four strokes in the vertical and horizontal directions is basically the same. The circle to be written on the right hook is thick and heavy, so that the right side is not empty and other strokes are even in thickness. The overall density is consistent.
Ceramic, semi-closed structure.
Among them, the word "first" is generally to the left, leaning against the bottom of the word. The left vertical is thinner than the right vertical, the two vertical are shaped like a figure of eight, and the bottom circle of the right vertical is slightly hooked. The distance between the three short horizontal lines is basically the same, and the right sides of the two short horizontal lines are not adhered.
The three points at the bottom of the letter are distributed in an arc shape according to the first letter, the middle point is on the outermost side, the bottom is pressed flat against the front, and the pen is twisted and stuck to the right vertical of the first letter.
? The whole word is basically square, and the prefix and the bottom are interdependent and integrated.