How to make lanterns?

Method 1: Materials: cloth, 7 iron wires, round plastic and wooden sticks. Manufacturing method: Make four iron wires into an arc, hold the bottom of the white iron wire into a small hook, then make two iron wires into a circle, one on the top and one on the bottom, then wrap them tightly with cloth, and put round plastic on the bottom. Then cut a wire into four sections. Don't hook the wind on the top hook and then tie it to the stick. The last step is to put the candle in! You're done! Method 2: Materials: bamboo strips, cotton thread, glue, iron wire, gauze, candles, cotton thread, bamboo plane, scissors, etc. Production steps: 1, put the bamboo in a steaming room for half an hour, then take it out and dry it in the shade, but it can't be excessively dried or exposed to strong light. 2. Scrape the rough surface of bamboo strips with a bamboo plane and cut them out. Stick cotton gauze, brush the diluted glue evenly on the surface of the skeleton, then gently stick the cut gauze on the lamp holder, and then brush it flat with a brush dipped in glue. It should be noted here that the glue brush must be a clean brush, otherwise the lamp surface will be messy. At the same time, the pasted paper must be pasted without seams in order to be truly pasted. 7. Put the lanterns in a cool and ventilated place to dry. 8. Painting. Draw according to one's personal preference. 9. After painting, decide whether to write according to the actual situation. When the characters and patterns are completely dried, brush a layer of tung oil, and then dry the tung oil in the shade, and the lantern is finished. Here is a diagram: /dispbbs.asp? boardID = 26 & ampID = 588 & amppage=4 /viewthread.php？ tid=7384