Select >> LAN>& gt LAN port working mode, and select all four LANs;
Configure the route and click >; & gt Wan, if the content is empty, click >; & gt Create a new setting;
Click >> wireless network to set parameters;
Save. After setting the above parameters, save and restart.
HG8245 light cat opens the route and automatically dials the Internet. Specific operation:
1. First, you need to log in with the super user and password of hg8245 to set the route?
Login address:192.168.100.1
2. It is a good habit to back up the configuration file. If something goes wrong with 8245, you can recover quickly here!
At >> system tools, > > internal USB backup recovery.
Fast recovery of USB, and the configuration file should be automatically recovered from USB at startup.
3. Start setting the route: select >> LAN>& gt LAN port working mode, and select all four LANs, that is, turn on the routing function of these four ports. If there are unselected ports, the unselected ports cannot be routed.
4. Configure routing
Point >> WAN
If the content is empty, you can only create a new one. Click >> New, and a parameter table will appear, with the following contents filled in:
Enable WAN connection: tick
Connection Type: Routing
List of services: Internet
Enable VLAN: Check.
VLAN ID number: 102
802. 1p:5
Multicast VLAN ID: empty
Method of obtaining IP: select pppoE.
MRU: 1492
Enable NAT: Check.
User name and password: fill in the user name and password of Internet dial-up mobile phone for you.
Dialing mode: automatic
Fill in the form above and click Apply. Don't make any mistakes in each one. If they are wrong, they can be deleted and rebuilt.
5. Configure the wireless network
Click >> wireless network, a parameter table will appear, and fill in the following contents:
Tick before starting the wireless network.
SSID connection name: You can write your own name.
Connection activation: checked
Don't change anything else. If you want to encrypt, please set password verification in encryption mode.
By application, as follows:
preserve
After setting the above parameters, save and restart, otherwise the boot will be gone.
Click >> System Tools >> Profile and click Save Settings.
Click >> System Tools >> Restart.
Close the page, log in again, click >> status, > > WAN information, and you will see that you have connected and some IP addresses, indicating success. Now you can enjoy the application of 8245 routing. As shown in the figure below:
All right.