Not necessarily. Basically, there are at least 15 specialized courses for self-taught examination.
Do you buy books for self-study, and then register for the exam after learning well?
You can buy your own books and come back for self-study, or you can attend social remedial classes. You can't wait until you learn well, because you have to register at the time specified in the local study room every year.
Also, if you register in June, do you want to take 15 together or 10/5?
You can only take four exams at a time, because each exam lasts only two days, one in the morning and one in the afternoon, so it is best to take only four exams.
What is the difference between mechanical manufacturing and its automation education and mechanical manufacturing and its automation?
In fact, there is not much difference. If you want to engage in education, you'd better learn from the former. If you are engaged in mechanical manufacturing, both majors are fine.
Mechanical manufacturing and automation education and mechanical manufacturing and automation courses?
Brief introduction of mechanical manufacturing and automation education specialty (undergraduate)
No. Course Code Course Name Credit 1 022 Introduction to Mao Zedong Thought 2 2 033 Principles of Marxist Political Economy 3 3 656 Physics (Engineering) 6 4 30 1 English (2) 14 302 Japanese 303 Russian 304 French 5 474 Probability Theory and Mathematical Statistics 3 6 648 C Language Programming. 4 7 468 microcomputer principle and interface technology 6 8 650 mechanical manufacturing technology 7 9 65 1 hydraulic transmission and pneumatic technology 4 10 463 numerical control technology and its application 41653 electric transmission and programmable controller (PLC) 4 12 654 special processing 5/kloc.
Note: 16- 18 is an additional course.
(a) mechanical graduates can directly apply for this major;
(b) Those who have graduated from non-mechanical majors or above are required to take three additional courses: mechanical drawing, mechanics of materials, mechanical principle and mechanical parts.
Examination plan for mechanical manufacturing and automation specialty?
First, the guiding ideology?
Self-taught mechanical manufacturing and automation specialty is mainly set up to meet the urgent demand for mechanical manufacturing and automation professionals in China at present. At the same time, according to the characteristics of the higher education self-study exam, we should pay attention to examining the candidates' mastery of the basic knowledge, basic theory and basic skills of this major and their ability to analyze and solve problems by using what they have learned. ?
Second, the educational level and specifications?
There are specialized courses and independent undergraduate course in the major of mechanical manufacturing and automation, which are specialized courses and undergraduate courses respectively. The overall requirements are the same as those in full-time colleges and universities. Courses are calculated by credit. After passing the examination of each course, a single subject certificate will be issued and corresponding credits will be obtained.
Who has passed five public basic courses, seven professional basic courses and three professional courses in accordance with the provisions of the professional examination plan, with a cumulative score of not less than 78 credits, and whose ideological and moral appraisal meets the requirements of college graduation certificate.
Who according to the provisions of the independent undergraduate course part of the professional examination plan, graduated from the professional college or non-professional college and obtained the qualified results of the required additional examination courses, and then obtained the qualified results of 4 public basic courses, 6 professional basic courses and 3 professional courses specified by the undergraduate course, with a total score of 75 credits, and passed the graduation design and met the requirements through ideological and moral appraisal, issued an undergraduate diploma; At the same time, his academic level has reached the degree standard stipulated by the state. According to the provisions of Article 22 of the Higher Education Law of People's Republic of China (PRC) and the Regulations of People's Republic of China (PRC) on Academic Degrees, the examiners with the right to award academic degrees will award bachelor's degrees.
Three, professional training objectives and basic requirements
At the junior college level, applied engineering and technical talents are trained who are engaged in the preparation of mechanical manufacturing process and the design of process equipment, and the selection and management of mechanical manufacturing equipment.
It is required to master the basic knowledge of computer application, engineering mechanics, mechanical design, electrical and electronic technology, mechanical manufacturing technology and numerical control technology necessary for this major; Have the ability of preliminary computer drawing, compiling processing technology and designing process equipment, be able to initially select and manage mechanical manufacturing equipment, and have certain economic analysis ability.
Independent undergraduate course has trained senior engineering and technical personnel in the fields of mechanical manufacturing and automation, such as design and manufacturing, scientific and technological development, applied research, technological transformation and economic management.
The basic requirements of undergraduate majors are: mastering the basic knowledge of probability theory and mathematical statistics, computer software foundation, industrial microcomputer, detection technology, programmable controller, modern design method, mechanical manufacturing equipment design, precision machining, special machining, automatic manufacturing system and economic management; Have the preliminary design ability of combining electromechanical with computer and the ability to engage in modern mechanical manufacturing.
4. Examination courses and credits?
(1) Professional subjects
Requirements for examination courses and credits: The examination courses for this major shall be no less than 15, and the total credits shall be no less than 77 credits.
Compulsory courses and credits: politics (8), college Chinese (4), foreign language (7), advanced mathematics (7), computer application foundation (4), mechanical drawing (7), engineering mechanics (5), mechanical design foundation (7), electrical and electronic technology (6), and
Practical links and requirements:
(1) Practice: metalworking practice, knowing the operation techniques of casting, forging, welding, turning, milling, planing, grinding and locksmith.
(2) Courses and experimental credits include experiments: computer application foundation.
(3) Courses with course design and course design credits: mechanical design foundation.
Description:
(1) Mechanical drawing includes mechanical drawing, computer drawing and tolerance. 1 is computer drawing.
(2) Engineering mechanics includes theoretical mechanics and material mechanics.
(2) Independent undergraduate course?
Examination courses and credit requirements: this major course is not less than 13, and the total credit is not less than 77 credits.
Compulsory courses and credits: public politics (4), foreign languages (14), physics (engineering) (6), probability theory and mathematical statistics (3), modern design method (6), sensor and detection technology (5), enterprise management (5), microcomputer principle and interface technology (6).
Practical links and requirements:
(1) course and experimental credits: physics (engineering) (1), modern design method (1), sensor and detection technology (1), microcomputer principle and interface technology (2), electric drive and programmable controller (PLC) (65433).
(2) Course credits and course design include course design: mechanical manufacturing equipment design; (2) automatic manufacturing system; (2) elective 1 course;
(3) Graduation design (thesis) and defense.
Description:
(1) graduates of this major can directly apply for this major;
(2) College graduates majoring in power engineering should take mechanical manufacturing technology (7), numerical control technology and its application (4) when applying for this major;
(3) Graduates of other engineering majors are required to take mechanical drawing (7), mechanical manufacturing technology (7) and numerical control technology and application (4).
Verb (abbreviation of verb) course description and self-study teaching materials
(1) specialist?
1, political economy (omitted)?
Self-taught textbook: Political Economy (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Ning Yushan, published by 1993, Wuhan University Press. ?
2. Philosophy (omitted)
Teaching material for self-study: Philosophical Principles (edited by the National Higher Education Self-study Examination Steering Committee), edited by Xiao Ming, published by 1997, Economic Science Press.
?
3. College Chinese (College)?
The main content of this course is to select 56 excellent argumentative essays, expository essays, narrative essays and poems, and briefly analyze and evaluate the ideological content and writing methods of these works. The purpose of study is to make the self-taught candidates improve their reading comprehension ability of Chinese language and literature articles and their preliminary analysis and evaluation ability of literary works on the basis of their high school Chinese level, and improve their writing ability and cultural literacy. ?
Teaching material for self-study: College Chinese (edited by the National Higher Education Self-study Examination Steering Committee), edited by Xu Zhongyu, published by 1994, and published by East China Normal University Press.
?
4. English 1?
The purpose of the course is to enable candidates to master the basic knowledge of English, master more than 3,000 English words, learn to use commonly used language reference books, and have preliminary independent reading ability and translation ability. After completing this course, candidates can master the basic reading ability, read English materials related to their major with reference books and translate them into Chinese, and the translation is basically smooth. ?
Self-taught textbook: College English Self-taught Course (Volume I) (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Gao Yuan, published by 1998, and published by Higher Education Press.
5. Advanced Mathematics (Engineering College)?
Course requirements: make candidates master the basic knowledge of unary function and calculus and ordinary differential equations, multivariate function calculus (including spatial analytic geometry) and series. Master the basic concepts, theories and methods of related content, have relatively skilled calculation ability and problem-solving ability, and cultivate abstract thinking and logical reasoning ability, spatial imagination and preliminary ability of abstract mathematical model.
Teaching materials for self-study: Advanced Mathematics (Volume I and Volume II) (edited by the National Higher Education Self-study Examination Steering Committee), edited by Lu and Ma Zhien, 199 1 published by Higher Education Press.
6, computer application foundation (omitted)?
Teaching material for self-taught examination: Fundamentals of Microcomputer Application (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Yang Mingfu, published by 1996, and published by Machinery Industry Press.
7. mechanical drawing?
The purpose of this course is to cultivate candidates' drawing, reading and preliminary graphic ability, and at the same time learn the basic knowledge of tolerance and cooperation. It is required to learn basic drawing, correctly draw and read general part drawings and assembly drawings with moderate complexity. With the development of new computer drawing technology, it is required to understand the basic knowledge of computer drawing, be familiar with the composition of computer drawing system, and initially master drawing two-dimensional graphics with a typical drawing software. ?
Self-taught textbook: Mechanical Drawing and Mechanical Drawing Problem Set (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Yu Hongshu, published in 2000.
8, engineering mechanics (machine)?
The basic requirements of the course are: to master the relationship between the simplification of mechanics and the force when the object is in balance, to master the characteristics of the object motion and the relationship between the force acting on the object and the change of the object motion, and to master the strength, stiffness and stability of engineering components.
Self-taught textbook: Engineering Mechanics (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Zhang Derun, published in 2000, and the publishing house is to be determined.
?
9, mechanical design basis?
The basic requirements of the course are: mastering and understanding the mechanical structure, movement, stress and mechanical efficiency, and selecting the type of mechanism and designing its main dimensions according to the given movement requirements and mechanical conditions. Master and understand the work of mechanical parts.
Principle, characteristics, failure form, selection and calculation method. Train candidates to have the preliminary ability to design general parts and simple mechanical devices with general parameters by using standards and manuals. ?
Self-taught textbook: Fundamentals of Mechanical Design (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Ding Hongsheng, published in 2000.
10, Electrical and Electronic Technology?
This course mainly studies the application of electromagnetic phenomena and electronic technology in the field of engineering technology. Candidates are required to master the basic theories, basic knowledge and basic skills applied in the fields of circuit, motor and electronic technology, with the emphasis on understanding and mastering basic experimental skills.
Teaching material for self-study: Electrician and Electronic Technology (edited by the National Higher Education Self-study Examination Steering Committee), edited by Zhao Jishan, published by 1999, China Electric Power Press.
1 1, machinery manufacturing?
This course is a comprehensive course to study the manufacturing methods of common mechanical parts, that is, to study the close relationship between material selection, blank manufacturing and heat treatment methods and mechanical processing into finished products. Including metalworking practice, candidates need to observe casting, forging, welding, heat treatment and cutting at the production site.
?
Self-taught textbook: Fundamentals of Mechanical Manufacturing (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Shengshanquan, published by 1999, and the publishing house is to be determined.
12, engineering economy?
The main contents of the course include: basic economic elements of engineering economic analysis, basic principles of engineering economic analysis, basic methods of economic benefit evaluation, feasibility study of engineering projects, new product development and value engineering, equipment wear compensation and its economic analysis, production cost control and analysis, etc. Through study, master the basic knowledge and theory of engineering economy and the evaluation method of economic benefits, evaluate and judge the economic benefits of various technical schemes with the market as the premise, economy as the goal and technology as the means, and make decisions. ?
Teaching material for self-study: Engineering Economics (edited by the National Higher Education Self-study Examination Steering Committee), edited by Chen Xipu, published in 2000, and the publishing house is to be determined.
?
13, mechanical manufacturing technology?
The basic requirements of the course are: understanding the cutting process, the functions of machine tools, the processing technology of typical parts and the new development of modern mechanical manufacturing technology. Focus on mastering the basic theories and skills such as the formulation of machining process regulations, fixture design principle and machining quality, and machine assembly technology. Through the study of this course, candidates initially have the ability to formulate process regulations, design special fixtures and analyze and solve process problems in the process of mechanical manufacturing production. Lay a foundation for the technical and management work of this major. ?
Self-taught textbook: Mechanical Manufacturing Technology (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Dong Haisen, published in 2000. ?
Reference textbook: Mechanical Manufacturing Technology, edited by Huang Heting and Wu Shanyuan, Machinery Industry Press.
?
14, CNC technology and application?
Numerical control technology and application is a specialized course of this major. The basic content of the course is to learn the knowledge of the main structure of equipment, computer control principle, servo system and feedback system through the typical product CNC machine tools, focusing on mastering the programming technology of two-coordinate control, including necessary mathematical calculations. Make candidates master the basic knowledge and skills of the main structure, working principle, debugging, testing, operation and maintenance of CNC machine tools. ?
Self-taught textbook: Numerical Control Technology and Its Application (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Lin and published in 2000. ?
(2) independent undergraduate course?
1, the revolutionary history of China (omitted)?
Teaching material for self-study: History of China Revolution (edited by the National Higher Education Self-study Examination Steering Committee), edited by He Qin, published by 1993, and published by Wuhan University Press.
?
2. English 2
This course is suitable for candidates who have completed English courses in middle schools. Including systematic knowledge of English grammar, there are about 3,800 English words (including about 1.600 middle school words), about 750 phrases, and the reading volume is more than 50,000 words. This course focuses on the basic vocabulary and grammar of English, and the main purpose of the course is to cultivate reading ability.
Teaching materials for self-study: the first and second volumes of College English Self-study Course (edited by the National Higher Education Self-study Examination Steering Committee), edited by Gao Yuan, published by 1998, and published by Higher Education Press.
3. Physics (engineering)?
The course content includes: the basic theory of mechanics, heat, electromagnetism, vibration, wave, wave optics and modern physics; Theoretical basis and basic skills of physical experiments; Introduction to the development of main branches of modern physics; And its application in science and technology and production practice. This course is an important basic course for engineering majors, which can lay the necessary material foundation for higher engineering and technical personnel to master scientific thinking methods, cultivate scientific research ability, broaden their horizons, stimulate the spirit of exploration and innovation, improve scientific quality and further learn new theories and technologies in the future. ?
Teaching material for self-study: Physics (Engineering) (edited by the National Higher Education Self-study Examination Steering Committee), edited by Ding Junhua and Qi Youlong, published by 1999, Liaoning University Press.
?
4. Probability theory and mathematical statistics?
The course contents include: random events and probability, random variables and probability distribution, random vectors, mathematical characteristics of random variables, limit theorems, samples, statistics and sampling distribution, parameter estimation, hypothesis testing, regression analysis and variance analysis.
Self-taught textbook: Probability Theory and Mathematical Statistics (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Fan Jincheng, published by 1999, and published by Liaoning University Press.
5. Computer software foundation?
The main contents of the course are: the basis of C language and data structure, the application of database management system and the basic methods of software design and development. There should be some computer exercises in this course.
?
Textbook for self-taught examination: Fundamentals of Computer Software (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Lei Tianyu, published in 1999, and the publishing house is to be determined.
?
6. Industrial microcomputer?
The main content of the course is the composition principle of microcomputer system and its typical application in mechatronics engineering. The basic requirements of this course are: learning the principle and composition of the most commonly used mainstream IBM-PC computer, learning its instruction system, being able to write assembly language programs, being familiar with and preliminarily mastering the interface technology of PC bus and the principle and application of programmable controller (PLC), and further learning computer network knowledge on this basis, so as to lay a foundation for the following courses. This course requires necessary computer (software and hardware) experiments.
?
Teaching material for self-study: Industrial Microcomputer (edited by the National Higher Education Self-study Examination Steering Committee), edited by Changde Zhao, published by 1999, and published by Machinery Industry Press.
?
7. Sensors and detection technology?
The research object of this course is the working principle and characteristics of sensors commonly used in mechanical engineering, intermediate converter and its interface with microcomputer. This course also briefly introduces dynamic testing and its signal analysis and processing. Through learning, I have mastered the sensing detection technology, calibration and calibration methods, and become familiar with the concepts and methods of dynamic testing and its signal analysis and processing. Combined with typical examples, understand the application of sensors in mechanical and electrical products. There are necessary experiments in this course.
Self-taught textbook: Sensors and Detection Technology (edited by the National Higher Education Self-taught Examination Steering Committee), edited by Zhang Jianmin, published in 2000. ?
8. Electric drive and programmable controller?
Electric drive and programmable controller is a basic course of this major. It is a subject that studies the problems of electrical drag and electrical automatic control in mechanical manufacturing. The basic requirements of the course are: mastering the working principle, system analysis and design method of special motor control and drive system, and the working principle and application of PLC programmable controller.
Reference Textbook: Electric Drive and Control of Machine Tools, edited by Wang Guangquan, Machinery Industry Press.
9. Economic management?
This course systematically expounds the knowledge of enterprise economic management that engineers and technicians need. The basic requirements of the course are: to understand the basic knowledge of enterprise production management, quality management, equipment and materials management, human resource management and financial cost management, to master the general methods in market forecasting and business decision-making, as well as the specific methods in technical and economic analysis and evaluation and investment decision-making in product development and project investment. ?
Reference textbook: Enterprise Management and Technical Economy, edited by Tang, Shanghai Jiaotong University Press.
?
10, modern design method?
The course takes computer aided design (CAD) as the main line, and combines finite element method with optimal design, and selects simple computer software to comprehensively apply finite element method and optimal design method. The main contents of this course include: developing modern design methods, computer aided design (CAD), optimization design, finite element method, reliability design, plane rigid frame CAD design and optimization system design. Through learning, we can master the basic principles and applications of these design methods and lay the foundation for their application in engineering. ?
Teaching material for self-study: Modern Design Method (edited by the National Higher Education Self-study Examination Steering Committee), edited by Ying Jinchun, published in 2000 and published by Machinery Industry Press.
1 1, precision machining and special machining?
Precision machining is a course to study the technology, working principle and method.
The basic requirements are: mastering the methods of precision machining and ultra-precision machining, analyzing the machining error and precision (thermal deformation, vibration and residual stress), machining precision parts, and the prospect of precision machining and ultra-precision machining technology. Special machining is a new machining technology and method different from traditional machining. It directly uses electric energy, electrochemical energy, acoustic energy, thermal energy and mechanical energy to process all kinds of difficult-to-machine materials and complex surfaces. The basic requirements are: mastering the basic principles, basic equipment, process rules, main characteristics and application scope of various special machining methods such as EDM, WEDM, electrochemical machining, laser machining, ultrasonic machining, electron beam machining and ion beam machining. ?
Reference textbook: Precision Machining, edited by Yuan Zhejun. ? Special Processing, edited by Liu Jinchun and Lu Jipei, Machinery Industry Press.
?
12, mechanical manufacturing equipment design?
This course introduces the uses, functions and working principles of various major mechanical manufacturing equipment, and grasps the design principles and methods of major mechanical manufacturing equipment. The basic requirements of the course are: mastering the design of metal cutting machine tools, industrial robots and logistics systems and equipment. It lays a certain foundation for analyzing and solving the design, transformation, operation, development and maintenance of mechanical manufacturing equipment in the future. ?
Reference textbook: Design of Machinery Manufacturing Equipment, edited by Feng Xin 'an, Machinery Industry Press.
?
13, automated manufacturing system?
Automated manufacturing system is to learn the processing methods and characteristics of various production automation in modern manufacturing technology. The basic requirements of the course are: group technology; CAPP、FMS、CAD/CAM、CIMS； Modern manufacturing management technology, logistics technology and other modern advanced manufacturing systems. Candidates are required to combine what they have learned in the past with the basic knowledge of this course, and have the preliminary ability to analyze and deal with the technical problems of mechanical manufacturing automation.
?
Reference textbook: Advanced Manufacturing Technology, edited by Zhang Genbao, Chongqing University Press.
Recently, many netizens called and wrote to ask how to register for the exam. "What are the majors for self-examination?" "What are the requirements for self-examination?" . In order to let everyone have a comprehensive understanding of the self-study exam, the steps of the self-study exam are briefly summarized as follows for your reference.
Taking the self-study exam is basically divided into the following five steps:
Step 1: Understand the higher education self-study exam.
Step 2: Preparation before registration
Step 3: Sign up for the self-study exam.
Step 4: Exam Precautions
Step 5: Graduation.
☆ The first step: self-study.
To take the self-study exam, we must first have a preliminary understanding of the self-study exam system of higher education in China.
Self-study examination of higher education is an important part of higher education in China. It is a form of higher education with China characteristics, which combines individual self-study, social assistance and national examination. Moreover, candidates who take the self-taught examination are not limited by gender, age, nationality, race and education level, and can choose relevant majors according to their own conditions and participate in the study of this professional course without passing the joint examination. After the unified examination organized by the state, I got qualified results. After passing all the theoretical and practical courses stipulated in the teaching plan, you can get a college diploma or an undergraduate diploma. Undergraduate graduates can also apply for a bachelor's degree.
Self-taught degree is recognized by the state, and self-taught graduates enjoy the same treatment as similar graduates in ordinary colleges and universities. The Higher Education Law of People's Republic of China (PRC) clearly stipulates that "the state implements the system of self-study examination for higher education, and those who pass the examination will be issued with corresponding academic certificates". The Provisional Regulations on Higher Education Self-taught Examination issued by the State Council also clearly stipulates that "the treatment of graduates of higher education self-taught examination is the same as that of similar graduates in ordinary universities".
☆ Step 2: Preparation before registration
First, choose a major:
First of all, we should carefully read the "Application Guide" issued by the higher education self-study examination committee of this province (city), understand the registration time, registration place, registration procedure, professional situation of the examination and the curriculum arrangement of this examination, and carefully choose the major to apply for according to the nature of the work and the actual situation. At present, professional information of some provinces and cities has been collected (click to view).
When choosing a major, we should pay attention to the fact that there are many majors in various provinces, some of which are open to the society and candidates are not limited; Some majors are entrusted by departments, which are limited to on-the-job personnel in this system; Some undergraduate majors and special majors (such as medical majors) still have some specific requirements for candidates' academic qualifications and occupations.
You should first consider your hobbies. Interest is the best teacher. Only when you are interested can you really devote yourself to your study.
Secondly, we should choose a major suitable for our own cultural foundation to ensure the smooth progress of learning. For example, if you have a good mathematical foundation and flexible logical thinking, you can consider choosing a science and engineering major; If you have a good memory, you can choose a major with strong memory.
Third, we should fully consider the needs of the society and the development of the industry, and choose some majors whose supply exceeds demand in society, which will have an impact on job hunting and employment in the future. The higher education self-study exam has two academic levels: junior college and undergraduate, and three professional types: junior college, undergraduate and independent undergraduate course. Click to view the professional introduction (specialist section, undergraduate section, independent undergraduate course section) and detailed explanation of types.
On the basis of choosing a good major, determine the courses to be tested this time and go through the registration procedures within the specified time. After choosing the major and course to be tested this time, you should buy the professional examination plan of this major as soon as possible, and conduct self-study according to the syllabus of the course self-study examination of related courses and the specified required reading materials.
Second, the selection of remedial classes and teaching materials should pay attention to matters
1, the choice of remedial classes
Social aid is an intermediate link between self-taught students and national examination, and it is a bridge and link to help self-taught students to succeed. The organizational forms of social assistance are as follows:
(1) Self-taught students organized by colleges and universities. Including ordinary institutions of higher learning, but also TV universities, party organizations, youth league organizations, cadre schools and other institutions at all levels. Most of these schools provide full-time education for full-time study. Teaching facilities are relatively complete, teachers are strong, and there are many aided majors, which is more suitable for high school graduates and non-amateur learners to continue their studies.
(2) Self-taught students sponsored by the entrusting department and the employing unit. Including schools organized by departments, training centers and various forms of counseling stations.
The biggest advantage of this kind of departmental assistance is to organically combine the majors assisted by self-study exams with the talents training direction needed for development, and form a systematic and organized assistance activity. Starting from the industry characteristics of employees who participate in the study, the study time and methods are flexible and diverse, which is conducive to solving the contradiction between work and study, so it is more suitable for on-the-job employees to choose their majors according to their jobs and participate in student assistance.
Author: kgdxk seal 2006-3-1721:16 reply to this statement and delete it.
-
2 self-study step reference
(3) Social forces help students. Most of these aided institutions belong to private colleges and universities, including schools run by social organizations and democratic parties, and aided schools run by retirees from relevant social departments relying on relevant units.
When choosing a course, we should pay attention to the following questions:
(1) It is necessary to choose a student-aided institution that is approved by the education administrative department, audited and filed by the self-taught institution, and has formal qualifications for running a school.
(2) Whether the courses offered by the school belong to the national self-taught series and are consistent with the majors chosen by the candidates themselves. Before entering the examination, look at the professional introduction of the school and the professional examination plan of the self-taught examination offices in various provinces, municipalities and autonomous regions, and browse the curriculum catalogue of professional settings, so as to know fairly well.
(3) Whether the school's assistance methods and teaching hours are suitable for personal circumstances, such as full-time, part-time, amateur, evening school, correspondence, etc. Candidates can weigh which method suits them best according to their study time and study plan.
(4) Understand the quality of running a school and take a look at the facilities (hardware) and management (software) of the school. Which teachers teach? What is the local level of students' passing rate in the unified curriculum examination? These are all things that candidates should know clearly before choosing a school.
(5) In addition, some majors or a certain level of self-taught examination have specific conditions for candidates.
For example, applying for various medical majors requires on-the-job and professional counterparts. Candidates who go from junior college to undergraduate course also need to have a junior college diploma when applying for the exam. Even if the aid school doesn't make hard and fast rules for students' enrollment for the time being, the candidates themselves should understand the specific requirements of applying for the exam and avoid detours in the middle of study.
(6) At present, most majors in the self-taught examination have experimental courses and practical links. It is also an indispensable condition for candidates to complete their studies whether the aided schools they choose have good conditions for examination in experiments and practice.
2. Selection of teaching materials
Teaching materials for self-study examination in higher education are managed at two levels. All textbooks of the national unified examination course are compiled and published by the National Examination Committee, which provides them to candidates as designated textbooks; All provincial unified examination courses are written or designated by the provincial examination Committee.
The national and provincial self-study examination offices announce the examination plan to the society every year, and the plan clearly stipulates the teaching materials used in each course. Candidates should pay attention to the name, author, publishing house and other relevant information of the prescribed teaching materials in order to purchase them according to the regulations.
Self-study textbook