1. Use the method of mounting.
put a piece of paper upside down and attach it to the glass, then spray mist water droplets with a watering can and spread a layer evenly on the paper. Then use the brush to drive out the bubbles back and forth. This step is the most difficult, and pay attention to the brush. Pay attention to the strength and method of brushing, and it takes effort. If you are not careful, you may tear the paper with water.
this is the method of mounting, and it is very useful to remove wrinkles. But this just flattens the paper. Some rice paper will flatten when it dries, and some will still wrinkle.
2. Use an iron
First, use an iron to fold the calligraphy and painting in half, and then use an iron to flatten the middle. Don't press the folded parts too hard. Then spread the whole piece out, and folding the four sides will leave a fold line on the paper. You can spray a little water or not, and then iron the folding line with an iron. If you do this, it will not be peaceful, but it is also relatively simple and can be seen in the past normally.
Extended information:
There is such a jargon in the art world, which is called "It's better to post thousands more than one". Of course, there is no benefit in pasting more than a thousand articles, but if one article is missed, it will lead to endless troubles, which will directly lead to the restoration of the framed paintings and calligraphy, and new breaks will appear again, which makes people feel that all previous efforts have been wasted.
objectively speaking, it is normal for a restored and mounted painting and calligraphy to have several creases, but if there are many creases, it will cause new damage to the old painting and calligraphy once again. Therefore, the restorer takes a cautious attitude towards this process.
1. Riding seam sticker:
The requirement of riding seam sticker is to overlap the center line of the folding strip with the broken mark. In other words, stick the folding strip at the center of the broken strip. Imagine that when we draw lines for the broken line, some lines have deviated from the central position of the broken line, and when we stick the strip, we stick the strip askew because of carelessness and other reasons, resulting in the edge of the strip being flush with the broken line; In this way, not only can it not strengthen, but it also increases the seriousness of this fracture. ?
2. Multi-pasting:
Multi-pasting means that one layer of folding strips can't resist breaking creases, but multiple layers are needed to solve the problem. The most common is the stacked pagoda shape. For example, a painting with a thick core has been completely broken. When a thin layer (about .2 cm) of folded strips is stacked, it is found that there are still creases in the overlapped strips, so it is necessary to stack another layer in the original position. ?