First of all, try to shoot with a white background or a simple background, and the main body of the picture should be simpler.
Then you can use PS to cut the picture. After cutting out the background, you can write some words in calligraphy.
Then it can be printed directly on rice paper, and the effect is very good. 1。
First, open the picture to be processed and copy the background layer into three parts (background copy, background copy 2 and background copy 3) and put them on the upper layer in turn. 2。
The background layer and the eye in front of the background copy 2 and copy 3 layers. First, close these three views, return to the background copy layer, enter the menu-Image-Adjustment-Decolorization, then press CTRL+U to adjust the brightness to +45, and then enter the menu-Filter-Noise-Median Radius 20. 3。
Go to menu-Filter-Blur-Gaussian Blur, blur radius is 15, and then go to menu-Filter-Art Effect-Watercolor, brush details are set to 5, darkening intensity is 0, and texture is set to 3. Go back to the menu-Filter-Blur-Gaussian Blur, set the blur radius to 5, and press CTRL+M to brighten its color.
Let's try this. Gaussian filtering and feathering should be used. You can have a look at this website called Design Frontier/Photos /Photoshop/index.
Htm is still very professional.
2. How to make photos into China ink painting effect?
Steps to make photos into China ink painting effect:
1. Open the original image and copy the background layer layer by layer.
2. execute: Filter >；; ; Fuzzy >; ; The number is fuzzy, and the parameters are set as shown below.
3. Create a curve adjustment layer with the following parameter settings.
4. Copy another layer of the background layer, press Ctrl+Shift+] to move to the top of the layer, change the layer blending mode to "color filter", and change the layer opacity to: 20%.
5. Create a new layer and draw some color blocks with a brush, as shown in the figure below.
6. colors for drawing: filter >; ; Fuzzy >; ; Gaussian blur with a value of 88.
7. Add layer mask, erase the extra color blocks with a black brush, and then merge the layers except the background layer.
8. Go back and copy 1 to create a hue/saturation adjustment layer, and set the parameters as shown below.
9. Create an optional color adjustment layer with the following parameters.
10. Merge all layers and execute: Filter >；; ; Texture >; Texture.
3. How does 3.PS make photos into ink style?
In Photoshop, photos can be made into ink style (CS6) by the following methods:
1. Right-click the copied layer, and then click Filter Library under the Filter menu.
2. First of all, in the "artistic effect", click painting daub, set appropriate parameters, and click OK.
3. Then, click Splash in "Brush strokes", set parameters, and click OK; You can also repeat the operation until you are satisfied.
Rendering:
4. Ask the tutorial to make a photo into an ink painting with ps.
(The picture above is the original picture)
1. First, open the picture to be processed, and put three copies of the background layer (background copy, background copy 2 and background copy 3) on the upper layer in turn.
2. Click on the background layer and the eyes in front of the background copy 2 and 3 layers, first close these three views, return to the background copy layer, enter the menu-Image-Adjustment-Decolorization, then press CTRL+U to adjust the brightness to +45, and then enter the menu-Filter-Noise-Median Radius 20.
3. Enter the menu-Filter-Blur-Gaussian Blur with the blur radius of 15, and then enter the menu-Filter-Art Effect-Watercolor, with the brush details set to 5, the darkening intensity set to 0 and the texture set to 3. Go back to the menu-Filter-Blur-Gaussian Blur, set the blur radius to 5, and press CTRL+M to brighten its color.
4. Enter the background copy layer 2, press CTEL+U to adjust its brightness to +40, and then enter the menu-Image-Adjustment-Brightness Contrast, adjust the brightness level of the image to +45 and the contrast to +80.
5. Set the layer blending mode of Copy 2 to positive overlay, then enter menu-Filter-Miscellaneous-Median radius is 4, and then enter menu-Filter-Artistic Effect-Watercolor, with brush details set to 14, dark tone intensity set to 0, and texture set to 1.
6. Press CTRL+M to slightly increase its brightness, and use CTRL+U and CTRL+B to slightly adjust its color and slightly increase its contrast. There is no specific value, just a slight modification.
7. Go to Copy 3 of the layer, press CTRL+M to increase the brightness, and set the blending mode of the layer to overlay. Use the magic wand tool to set the tolerance to about 3-5, click any colored place on the image, and then enter the menu-Select-Select similar. When finished, press CTRL+ALT+D to feather, and the feather radius is set to about 3-5. Enter the menu-Image-Liquefaction, and use the smudge tool to liquefy the selected place. When smearing, just drag it down at the selected place, and repeat this step several times. Of course, the selected areas cannot be in the same place.
8. Finally, you can click any color in the pattern with the magic wand tool, then enter the menu-Select-Select a similar one, then feather, and then use CTRL+M to darken the color of the selected part. You can also use CTRL+U to adjust the color image and saturation. You can adjust the rest of the discomfort slightly by yourself, and you won't explain it according to your own preferences. Well, this is a light-colored photo.
5. How does 5.PS turn photos into ink-and-wash effects?
1. After importing photos into photoshop, press "ctrl+j" to copy the layer once, just to be on the safe side.
2. Press and hold the shortcut key ctrl+l to open the color scale panel and adjust the black and white field to make the color contrast more obvious, as shown in the figure. 3. Copy the current layer, execute the "Style-Find Edge" command in the filter menu, and press ctrl+shift+u to remove the color of the edge.
4. Refer to the second step, and then open the color scale panel to make the black-and-white contrast at the edge of the line more obvious. 5. Adjust the layer blending mode to overlay and the opacity to 70%~90%, and set it according to personal needs.
6. Copy the processed background layer again, execute the "Blur-Frame Blur" command in the filter menu, and set an appropriate radius to make the photo appear hazy. 7. Execute the "Filter Library -Splash" command in the filter menu to simulate the ink brush stroke effect, and change the blending mode of the previous layer to overlay with an opacity of 70~90%.
8. After completing the above settings, you can turn the photo into an ink-and-wash style effect. .
6. How to make a landscape painting into an ink painting effect with photos?
1. First, open the picture to be processed, copy three background layers, namely background copy, background copy 2 and background copy 3, and put them on the upper layer in turn.
2. Turn off the eye icon in front of the background layer and the background copy 2 and 3 layers, close the views of these three layers, return to the background copy layer, select menu-image-adjustment-decoloration, press CTRL+U to adjust the brightness to +45, and then select menu-filter-noise-median radius 20.
3. Enter the menu-Filter-Blur-Gaussian Blur with the blur radius of 15, and then enter the menu-Filter-Art Effect-Watercolor, with the brush details set to 5, the darkening intensity set to 0 and the texture set to 3. Go back to the menu-Filter-Blur-Gaussian Blur, set the blur radius to 5, and press CTRL+M to brighten its color.
4. Enter the background copy layer 2, press CTEL+U to adjust its brightness to +40, and then enter the menu-Image-Adjustment-Brightness Contrast, adjust the brightness level of the image to +45 and the contrast to +80.
5. Set the layer blending mode of Copy 2 to positive overlay, then set it to menu-filter-noise-median radius is 4, then set it to menu-filter-artistic effect-watercolor, brush detail is set to 14, dark tone intensity is set to 0, and texture is set to 1.
6. Press CTRL+M to slightly increase its brightness, and use CTRL+U and CTRL+B to slightly adjust its color and slightly increase its contrast. There is no specific value, just a slight modification.
7. Go to Copy 3 of the layer, press CTRL+M to increase the brightness, and set the blending mode of the layer to overlay. Use the magic wand tool to set the tolerance to about 3-5, click any colored place on the image, and then enter the menu-Select-Select similar. When finished, press CTRL+ALT+D to feather, and the feather radius is set to about 3-5. Enter the menu-Image-Liquefaction, and use the smudge tool to liquefy the selected place. When smearing, just drag it down at the selected place, and repeat this step several times. Of course, the selected areas cannot be in the same place.
8. Finally, you can click any color in the pattern with the magic wand tool, then enter the menu-Select-Select a similar one, then feather, and then use CTRL+M to darken the color of the selected part. You can also use CTRL+U to adjust the color image and saturation. You can adjust the rest of the discomfort slightly by yourself, and you won't explain it according to your own preferences. Well, this is a light-colored photo.