1. Horizontal
(1) Go against the Tibetan front to the front end
(2) Turn into a round front and go right
(3) Turn to the end of the line
(4) Turn to the left
2. Vertical (1) Lead the pen tip upwards and lead it to the top
( 2) Make the pen tip vertical, then turn the pen tip downward
(3) Don’t pause when reaching the bottom point, and lift the tip gently
(4) Lift it up
3. Horizontal bend (1) Going against the front and writing to the left
(2) Turning to the front and writing to the right
(3) Writing along the front and writing downward
(4) The strokes become slower and slower, and the strokes are raised and retracted
4. Straight bends (1) The strokes go against the trend and upwards
(2) The strokes turn downwards< /p>
(3) Turn the pen to the right and then down
(4) Reach the end of the line and close the pen
5. Upper arc
The arc strokes of Xiaozhuan are the same as the previous horizontal and vertical strokes. You want to go right first, left first, and go up first. The key is to maintain a round and vigorous posture, maintain a consistent depth of the brush strokes on the paper, and an appropriate speed. Pay attention to symmetry. , the two arcs are connected in the middle, and the connection should be written naturally without leaving any trace.
6. Lower arc
For the lower arc, write the left half arc first, and then the right half arc. When writing the right arc, pay attention to the correspondence with the left arc. The lines must be completed in one go. Do not Hesitate slowly, otherwise the lines will be weak and lack strength.
7. Left and right outer arcs
When writing left and right outer arcs, the main thing is that the starting and ending points of the arcs on both sides should be consistent, and do not be biased. It should be symmetrical and natural, compact but not loose, fully reflecting the graceful and smooth beauty of seal script.
8. Square arc
When writing a square arc, no matter it is a rectangular or square arc, the pen must be turned into a circle, and the corners must be turned into arcs. The four corners must correspond, and the pen must be connected. Leave no trace, and be harmonious in all directions.
9. Curved arc
The curved drawings of Xiaozhuan have many changes and are very difficult. They should be written according to the degree of roundness. It is best to complete it in one stroke. If it cannot be completed in one stroke, use two or three overlapping strokes to complete it. At the turning point, pay attention to adjusting the tip of the pen or slightly twisting the barrel of the pen, and cooperate with the inward rotation of the wrist to make the tip of the pen turn smoothly.
The technique of overlapping pens
Many strokes of seal script appear to be completed in one stroke, but in fact they are written with a number of overlapping pens. To ensure that no traces are left at the joints, the main thing is There is no need to return to the end of the previous stroke, and the next stroke is inserted. The overlap of the two strokes just hides the overlap in the strokes. The overlapping pen is a very important part of the seal script writing skills. If you master this step, you can make the words smooth, graceful, and natural.